Friday, Day 1 For Houston Rockets 2017-Recap and Saturday’s Schedule

Today, Friday was the first day of Houston rocket launches.  This is new for this year. Usually Friday is just a set up day, but do to more rocket volume to achieve launching, Friday afternoon was added.  Eight schools tested a total of 12 rockets this afternoon.

According to reports from team members at the site, all 12 rockets left the rail. That does not mean each was a perfect launch,  but then that is why they are considered test vehicles. All in all it was a good day with fabulous weather, and a great new location with good results. And they get to do it all over again Saturday.

These are screen shots of the action in Houston. Quality isn’t always perfect but at least you can see some of what went on today. I will add more to Facebook and post them at some point on Saturday. The link to my page is down below these photos.

      

I do have more photos I grabbed from the live feed as well as some from team members that I will be posting Saturday morning. https://www.facebook.com/ginger.burow

Here is the schedule for Saturday as listed on the SystemsGo website.

Saturday, May 13, 2017
School
Name
# 1st Level
Tsiolkovsky
# 2nd Level
Oberth
Brazosport High School
Bradley Nelson
1
Brazoswood High School
Dale Hobbs
3 1
Channelview High School
Alan Stone
3
Davis High School
Hasan Johnson
2
Kingwood Park High School
Jim Brown
2
Liberty High School
Matthew Williams
2 1
SF Austin High School
Richard Hubbard
5
7
Schools Launching
Totals 18 2
May 21st Total Rockets 20

Please remember that since there is pubic access to this event this year,  there are tickets for order and those may be found on the SystemsGo website as well at this link: https://www.greateventseats.com/events.php?lID=92

Livestream is available again this year so friends and family can watch the action online. The link for that is on SystemsGo‘s website or posted here:  http://livestream.com/systemsgo

Here is Phil Houseal keeping the Livestream action going: 

Event details will be available here each day of the event. Daily reports featuring schedules, school names, results, pictures if available, and some editorial content will also be posted.

www.systemsgo.org as always is the place for more information on this program. You may also email them at info@systemsgo.org .Take the time to get your school involved, the future of your students will be greatly benefited.

SystemsGo Team Travels to Smith Point for an Early Start to Houston Rockets 2017-Friday’s Launch Schedule Included

The StsytemsGo team left today, Thursday, headed to Smith Point, near Anahuac, Texas down near Houston. This is a new location for this year. They arrived there early today,  setting up the launch site, and readying everything for an early start, as launches begin Friday afternoon. This is new for this year.

Launches will continue all day Saturday, and  half a day on Sunday with 17 schools launching a total of 39 vehicles.

The current launch schedule for Friday is shown below and may also be downloaded from SystemsGo website at the following address:  http://www.systemsgo.org/wp-content/uploads/2017/04/Flight-Schedule-Rockets-2017-Houston-4-4-17-.2.pdf

 

Friday, May 12, 2017
School
Name
# 1st Level
Tsiolkovsky
# 2nd Level
Oberth
Anahuac High School
Kirk Moore
1 1
Dickinson High School
Sara Malloy
1
Eisenhower High School
Jacob Arriaga
1
Pasadena Memorial High School
Katherin Melton
1
Pasadena Memorial High School
Kyle Jurek
1
South Houston High School
Kevin Herron
4
Victoria East High School
Adam Wertman
2
Victoria West High School
Cheryl Clark
1
Schools Launching    8
Totals 12 1
May 21st Total Rockets 13

This new launch site, will allow public access this year. A map to the location as well as directions are available at the SystemsGo Events page found here:

 http://www.systemsgo.org/events/

Phil Houseal  and Zach Pooser will be on site providing the Livestream up-link again this year so friends and family can watch the action online. Here is the link to the live stream for the Houston launches.

http://livestream.com/systemsgo

Zach and Phil provide a great experience for both viewers at home and the students and team on site while helping to bolster the STEM program. Allowing the public to share in the action and see what these students are accomplishing as they apply all they have learned in class, and continue to learn from their launch results, helps SystemsGo to grow interest in the future of the STEM program and the hands on approach to learning.

Please remember that since there is pubic access to this event this year,  there are tickets for order and those may be found on the SystemsGo website as well at this link: https://www.greateventseats.com/events.php

Just a note, the tickets are free of charge but are required for entrance. They are available on site at the gate as well but the preferred method is online at the link above.

Event details will be available here each day of the event. Daily reports featuring schedules, school names, results, pictures if available, and some editorial content will also be posted.

www.systemsgo.org as always is the place for more information on this program. You may also email them at info@systemsgo.org .Take the time to get your school involved, the future of your students will be greatly benefited.

Fredericksburg’s STEM Academy/Rocket Program-Spring Term Update #3 (April 1-April 30)

May is here and time is running out for the Fredericksburg STEM Academy as launch dates approach for the junior and senior groups. Juniors have a  May 18th test date at Rockets 2017 in Willow City. While the seniors are down to less than 3 weeks as Redbird 18 is scheduled for completion two weeks before school ends to allow for preliminary systems tests.Due to delays in manufacturing, testing will have to occur in the process of construction as components come in. Final testing will be the week of June 19th prior to their test at WSMR the following week. It is slated to launch at White Sands Missile Range on June 27th.

During April the seniors tested Low Density polyethylene (LDPE) three times on teststand. Data on all tests was consistent and exemplary. Currently the injector plate is being drilled again to increase the oxidizer flow rate to the correct  value to provide for complete combustion.  Due to this testing is on hold. Lately they have been experimenting with different ablative arrangements. The ablative has  burned through slightly but not enough to damage the test cell.

Below is an actual video of an engine burn test.  This one of the first video’s with HD video quality and audio.  The regularly captured video does not have audio embedded.  This is good for them too as they do these tests for NASA and this gives them something  more to show of their work.

https://goo.gl/photos/78HwtXxx8rytjxSV7

Mr. Matthes had this to say about this particular burn,  “It looks pretty good but we’re only getting about 1/3 of the oxidizer we should be getting so it is fuel rich.  It will not be as orange when we get the oxidizer flow rate correct.  The hope is that it is a really clean plume with mach diamonds in the plume.”

The senior’s “junior teststand” nick named “Baby Bird” is almost complete. They hope to conduct their first ever test on this new teststand possibly late this week. This teststand was created by the seniors starting last year during junior studies to test a fuel grain system designed and developed by them to interface with the hyportek injector and tank. They hope to have 3 successful tests on this teststand. If they achieve this, then they get to fly this new system at Willow City in last year’s rocket.  At this point,  they are getting fuel grains prepped.  Pictured below, are nozzles created for Baby Bird.

Redbird 18 still currently does not resemble a rocket, but they are making steady progress. The nozzle has been manufactured, seen here 

and  the nose cone mold is also back, seen here. 

Machining could only be created to within 8 inches of the tip, therefore they created the tip with 3D printing and epoxied it to the nose cone and are preparing it for fiberglass.

Other needed materials are in and have been sent out to Heartland Enterprises for machining.  Currently, Mr. Matthes says that the biggest test coming up will be next week when they pressure test the oxidizer tank.

Juniors are under pressure as the deadline for 100% completion of their rocket is May 11. Meeting this deadline will allow them time to complete their Flight Readiness Reviews (FRR) and be able to high light problems or errors that still exist. Components are coming in and weights on some are different than originally reflected in RockSim. Due to this they are updating their design to accommodate. Currently they are still on the wire between breaking the speed of sound and exceeding the 13,000 feet maximum allowable altitude. Breaking Mach means they also exceed altitude. Staying under 13,000 feet  means then they lose their shot at breaking Mach.

 Here Chris Calzada is working on RockSim trying to resolve the altitude velocity conundrum.

Meanwhile the Sophomores have been entrusted to work at their own pace to finish their last chapters and projects. Time remaining after completion of these is for 3D printing and modeling. Their learned skills in  isometric, creating section views, details and working drawing sets would now allow them to communicate effectively to a machine shop without the need for clarification.

Paul Kucherka, a FISD maintenance man and school function videographer developed an issue with the quadcopter that he uses to video. A few of the sophomores are going to attempt to design and develop a new wiring harness that may provide the solution to Paul’s needs, hopefully by the end of the school year,  this would allow him to continue using this equipment for video. In order to do this, a few other sophomores have been creating the multiview of one of the quadcopter’s parts on the 3D printer. Pictured below is the original part they are attempting to recreate.

This article is the seventh in a series, new for this school year ’16/’17 of monthly updates that will follow the Fredericksburg STEM Academy/Rocket program. This school is a participant of the SystemsGo STEM program. This series of articles is intended to support, encourage, and challenge students in the program as they share their working status and accomplishments throughout the year in the program. These publications will be available for tags and re-posting.

www.systemsgo.org as always is the place for more information on this program. You may also email them at info@systemsgo.org . Take the time to get your school involved, the future of your students will be greatly benefited.

Rockets 2017 Begins Next Week With a New Venue in New Mexico

The launch of Rockets 2017 blasts skyward on April 27th from a brand new venue this year as six schools from New Mexico join the SystemsGo program. Last year instructors from these schools came to Willow City to observe, learn and participate in launches in order to implement the program at a new site in New Mexico.

SystemsGo New Mexico is headed up by David Willden and currently includes the schools of Carlsbad High School, Hobbs High School, Jal High School, Lake Arthur High School, Loving High School and Lovington High School. This is their first year in the program and they will attempt launching a total of 10 one pound/one mile rockets at a location near Jal, New Mexico.  This new site, called the Discovery Education Launch Pad,  will be open to public viewing of launches, as are all sites except White Sands Missile Range this year. A link to location information and a map link are available at http://www.systemsgo.org/events/ .

The site will be open for admittance at 8:00 a.m. and launches will commence at 8:30 a.m.

If you plan to attend Jal or any of this year’s launches please register for your attendance ticket at http://www.systemsgo.org/save-the-date-for-rockets-2017/  or they may be gotten at the gate. These are free but required for admittance to each site.  Reserving them ahead at the website is preferred to obtaining them at the gate because the latter slows entrance to the site and may result in you missing the viewing of your intended launch.

You may also view any of the launches except WSMR on Livestream. That link will be available on the SystemsGo website closer to the launch. The New SystemsGo New Mexico also has a twitter feed you can join to keep up to date on what they are doing. That link is https://twitter.com/SystemsGoNM

The schedule of launches for Jal is also available at http://www.systemsgo.org/save-the-date-for-rockets-2017/ . I will post it here for launch day next week as well. I want it to be as accurate as possible so I will refrain from posting it now in case there are any late changes.

If you are in the Jal, New Mexico area, keep an eye out for this new vehicle. It just rolled out recently to support the new launch group. 

If you follow this program and like to view the launches, Rockets 2017  will continue with two  more launches in May. The first will be held in Smith Point just south of Anahuac, Texas for schools in the Houston area, on the weekend of  May 12-14, 2017. If you have been to the Houston area launches in the past you may want to check out the SystemsGo website for information because this is a new location for that area this year. Information and a map link are available.

Next the Stewart Ranch in Willow City, Texas will host the largest of the now three launch events on the weekend of May 18-21, 2017.  This testing site covers the Fredericksburg and  Hill Country area schools and all Texas schools not participating in the Houston launches.

Please watch the SystemsGo website, SystemsGo Facebook page,  SystemsGo Twitter feed: https://twitter.com/SystemsGoNews and this blog for upcoming information on theses events.

The senior groups are tentatively scheduled to launch their Goddard level rockets at White Sands Missile Range (WSMR) in New Mexico the week of June 26-30.  These are not available for public viewing or Livestream due to being tested on a military facility, but blog and SystemsGo updates will be posted online as available during that week.

More event details will be available here in upcoming days as events get closer. Daily reports featuring schedules, school names, results, pictures and some editorial content will be posted during the events.

www.systemsgo.org as always is the place for more information on this program. You may also email them at info@systemsgo.org . Take the time to get your school involved, the future of your students will be greatly benefited.

Fredericksburg’s STEM Academy/Rocket Program-Spring Term Update #2 (February 21-March 31)

April 1st is tomorrow, so time is becoming a factor for the Fredericksburg STEM Academy as launch dates approach for the junior and senior groups. There are no fools here though, just  several groups of future engineers working hard to meet their timelines. With March behind them there is only a little over 6 weeks left  for the  junior group until Rockets 2017 and their May 18th test date. The seniors have approximately 60 days as Redbird 18 is scheduled for completion two weeks before school ends to allow for preliminary systems tests.

More on these groups and their current status reports will be later in the article.

Sophomores are currently taking mid-term exams. This is due to the new schedule for classes this year which puts a full year’s curriculum into one standard semester. They have been busy using AutoCAD to create multi view drawings of objects. Dimensioning and tolerancing of these drawings will be learned next, followed by isometric drawings and 3D modeling. The students have been printing models of their multiview drawings using the newly installed 3D printer. All 3  3D printers available now are working well.

The student aide, Colby Marthaler  has also been using the 3D   printers to print all the parts necessary to create a model of the Falcon 9 Rocket SpaceX uses to transport satellites and the Dragon spacecraft into orbit.

Juniors had CDR’s (Critical Design Reviews) due for their rockets by March 30. Unfortunately they are just getting to them. Students will have to be studious in order to meet their May 18th launch date due to being behind schedule at this time. The payload for this rocket is a rapid growth slime mold. They have designed the payload in order to create a controlled experiment in which they should be able to determine how flight impacts the mold’s growth, negatively or positively.

The design criteria for their rocket is a one pound payload and breaking the speed of sound therefore achieving a transonic state. Currently neither criteria has been met so the group has more work to do to accomplish their goals by their launch date.

Their mid-term which is a LabVIEW development project has come along well. They are creating a workable program which requires specific methods and functions in order to attain a goal of designing and fabricating a micro test stand for Estes motors. They will be connecting  a (DAQ) Data Acquisition unit to a computer and registering it to that computer in order to read sensors, and programming a control and DAQ Virtual Instrument in LabView in order to run the test stand.

March began with more fuel grain tests at test stand. Two tests were completed in the first week alone, consisting of many hours of work to accomplish each. A temperature sensor indicated a high enough value in order to cause a programmed shut down on the first test that week.  After investigation, it was found that a ‘electrical noise’ caused an anomaly which gave the sensor its reading, and that it was in fact not outside normal operating parameters. The actual test did not experience any temperature concerns.

The same fuel grain was able to be used again in a 20 second burn, which allowed students to achieve a cumulative 40 second burn on one fuel grain.  The shut down was disabled for the second burn,  allowing the data to still record the temperatures caused by the ‘electrical noise’, but not to stop the burn test and it was a  full success without any further exceptions.

Mr. Matthes was very pleased with these burns and stated , “All data was processed and showed again the test stand was producing verifiable data similar to theoretical expectations.”

Students began another round of testing this week. Six new fuel grains will be tested accounting for three tests each of two different fuel types students have been working on. The  hope is that they will cycle through smoothly due to the fuel grains being prepped prior to testing.

  Here Hannah Boubel is working with graphite in order to make ablative, which is a sacrificial material in the pre and post combustion chamber so the burn does not penetrate the liner and steel test cell.

 In this photo,  Sterling Weatherford is preparing a fuel grain for installation in to the test cell.

Along with test stand work, the students have been hard at work on Rebird 18, their Goddard level rocket slated to launch at White Sands Missile Range on June 27th. Students have already contracted with Heartland  Enterprises and SRM Manufacturing for fabrications and parts have been supplied to them.

At this point in the process students are learning true cause and effect, and just how it can affect their outcomes.  The entire success of the vehicle from this point forward is contingent on the group not only working as a team as a whole, but also for each individual team to stay on top of their work and outcome. Many of the components are dependent on the progress of the others. Delays on one team’s  element directly affects the next  team creating delays down the line and strained time schedules.  Individual testing is conducted on each piece as it is finished.  Full up integration and testing of any systems that allow for ground based testing is scheduled for two weeks from the end of school when the rocket is due to be complete.

“They are well on their way to a successful vehicle.  The seniors will not have the luxury of adopting senioritis as there is still significant and mutually dependent work to be accomplished,” Mr. Matthes reported. “These next 60 days will be a true test of their team work, peer loyalty and persistence. ”

As the end of the school year approaches, these students are becoming more and more adept in their learning and knowledge as young and capable engineers. Their end of year rockets will be a testament to that learning, time and ability.

According to Mr. Matthes, “Students are becoming ‘plagued’ with knowledge and experience:  the more they know and become aware of, the more they have to take into consideration and the more challenging the process becomes.  However, it also makes for conditions more aligned with success.  Additionally, if we consider these students products of FHS and the FHS Engineering, then they should be welcomed by a market hungry for what they have to offer.”

If you follow this program and like to view the launches, Rockets 2017  will be held at the Stewart Ranch in Willow City, Texas on the weekend of May 18-21, 2017.  This testing site is open to the public. Please watch the SystemsGo website and this blog for upcoming information on the event. The FHS junior group will be testing their rockets on Thursday, May 18, 2017.

The senior group is tentatively scheduled to launch their Goddard level rocket at White Sands Missile Range (WSMR) in New Mexico the week of June 26-30. The current schedule for that event is as follows:

Sunday, Jun 25th             Travel Day

Monday, Jun 26th            T-1 and Site Set up/Rocket Prep at WC-50

Tuesday, Jun 27th            Launch Day One (Three Rockets – Fredericksburg, Union Grove, Alamo Heights)

Wednesday, Jun 28th     Launch Day Two (Three Rockets – Anahuac, Booker T. #1, Booker T. #2)

Thursday, Jun 29th          Contingency Day

Friday, Jun 30th                Travel Day

There are also launches in Houston for schools in that area the weekend of May 12-14, 2017. New for this year the Hobbs, New Mexico group of schools will launch 1/1 rockets in Jal, New Mexico on April 27, 2017, this site will also be open to public viewing.

This article is the sixth in a series, new for this school year ’16/’17 of monthly updates that will follow the Fredericksburg STEM Academy/Rocket program. This school is a participant of the SystemsGo STEM program. This series of articles is intended to support, encourage, and challenge students in the program as they share their working status and accomplishments throughout the year in the program. These publications will be available for tags and re-posting.

www.systemsgo.org as always is the place for more information on this program. You may also email them at info@systemsgo.org . Take the time to get your school involved, the future of your students will be greatly benefited.

Second Term Update #1 (January 9-February 21)-Fredericksburg’s STEM Academy/Rocket Program

January  is past and February is waning quickly, but the spring program is really building. There are big goals and events  for each class group. This semester is where their learning  hits the pad literally for the junior and senior groups as they build toward Rockets 2017 and their end of class projects.  There are three class groups this semester as the sophomore class begins study and the freshman class is complete until they re-enter the program as sophomores in January of 2018.

The freshman have moved on due to the new accelerated block schedule, but at the end of the semester they all agreed that communication skills were what they felt they had developed the most. They found themselves to be much more comfortable and  proficient  when speaking in public. Their final projects, the orange juice production plants went well as reported by Mr. Matthes. The students were all very excited about the class and course study, but not about having to wait a whole year to return to the STEM Academy.

The sophomores are just beginning their 5th week of studies since they are new to the program for this year. Their studies to this point included learning to hand draw multi-view drawings, interpreting 3D objects, and learning engineering lettering which they have recently completed. With these skills accomplished, they will be moving on to the ACC Auto CAD course within the next week.

These students have been using two older 3D printers  for these projects. The printers have a relatively small build space and so limit what the students can produce on them. The district has recently received a new larger 3D printer, the MakerBot Z18 which will be available later this month. This will be a benefit to these students as well as both upperclassmen groups as it will allow for much larger production pieces and will give them the ability to prototype designs.

While junior and senior classes will use this printer more often, the sophomores will be the first to learn how to use it. Even though their current course study will still be focused on smaller printing jobs, prototyping and future uses will necessitate knowing how to use the new printer.

Juniors began work on January 23, on their transonic rocket that they will launch in Willow City in May. They have begun the initial stages of the Design and Development processes. A timeline and a problem statement have been created, and they are about midway through the research process.

They have a Critical Design Review (CDR) due before spring break. Unfortunately they have not been able to narrow down the scope of their research as of yet. This keeps them spread out as  a team, and means they have to make up ground in order to make the pre-spring break CDR  deadline.

They are researching rapid growth organisms for a possible payload for the rocket, and hope to be able to study how flight affects their growth.

On Friday, February 17, the juniors along with sophomores, Gloria Burns and Eston Cooke joined the juniors as Brian Evans of Space Propulsion Group provided instruction on the basics of mathematical modeling. At the end of the presentation, juniors had the opportunity to present models they had developed and then also do trouble shooting on their profiles.

20170217_120050Sophomores Gloria Burns and Eston Cooke with Dr. Brian Evans.

The junior students were very receptive to Mr. Evans and his instruction, alleviating numerous roadblocks and enabling rapid progress in their modelling.

20170217_111700Here  juniors, Harrison Spisak and Jacob Weinecke make their presentations their burn model to Dr. Evans.

“Dr. Evans was down to earth and made  comprehension of something really difficult, easy.”-Corbin Smajstrla

“It was nice to have rocket science explained so it wasn’t rocket science.” -Evan Knapp

Juniors have been officially invited to begin learning and participation in fuel grain motor test burns, but currently seniors are the only ones conducting any test burns.

20170217_111026 Corbin Smajstrla and Dr. Evans at the board.

The seniors conducted their first hot fire test on Friday, February 17, while Dr. Evans from the Space Propulsion Group was in attendance. They accomplished a 10 second burn of Low Density Polyethylene (LDPE).

starboard-view A still photo from the burn test.

According to Mr. Matthes, ” The test was extremely successful with outstanding data acquisition that showed the motor preformed nominally, according to expected design parameters.  This was very exciting to have such a good, clean burn, good data, and fitting expected performance.”

Heartland Enterprises and SRM Manufacturing created a newly designed injector plate.  This allowed the class to keep their Friday deadline.  In spite of the piece needing to be manufactured quickly for the project,  these companies came through and the product was, “beautifully machined and performed with 10% of expectation regarding oxidizer mass flow rate,” stated Mr. Matthes.

On January 27, the Fredericsburg Middle School 7th grade GT(Gifted and Talented) group presented their payload for the Redbird #18 Rocket to the senior STEM class. It consisted of a group of sensors to measure UV Light, methane, acceleratometer, and barometric pressure.

20170127_142251 20170127_135355 The 7th grade GT class presentation.

New this school year, Mr. Matthes started requiring after school and extra curricular hour work on senior projects. When asked how this senior group was doing with this on their project, here is what he had to say about the group.

“There have been  a solid group of students who have been putting time in during study halls and some others who have been able to commit extended numbers of hours outside of school time to keep things moving forward.  These senior students have worked phenomenally.  They bit off a lot to accomplish this year and are on target to meet all of their expectations.  It is quite remarkable having the opportunity and privilege to work with them.  A substitute recently commented that during my absence, walking into the classroom after the passing period between classes was like walking into a full-fledged workforce environment where students were all fully engaged, scheduling, designing, problem solving, and just plain working without any instruction to do so.  I believe the skills these students have honed over the last 4 years through this program and all their other coursework has created a ‘product’ that any college, industry, and organization would wish to recruit.”

Keep up the great work, seniors, what an amazing and glowing endorsement.

If you follow this program and like to view the launches, Rockets 2017  will be held at the Stewart Ranch in Willow City, Texas on the weekend of May 18-21, 2017.  This testing site is open to the public. Please watch the SystemsGo website and this blog for upcoming information on the event. The FHS junior group will be testing their rockets on Thursday, May 18, 2017. The senior group is tentatively scheduled to launch their Goddard level rocket at White Sands Missile Range (WSMR) in New Mexico the week of June 26-30.  There are also launches in Houston for schools in that area the weekend of May 12-14, 2017. New for this year the Hobbs, New Mexico group of schools will launch 1/1 rockets in Jal, New Mexico on April 27, 2017, this site will also be open to public viewing.

The STEM Academy group was encouraged to attend the movie, “Hidden Figures” on Friday, February 10th at Fritztown Cinema. About 35 students from the program attended.  Here is what a few of them had to say about the movie:

“The movie was about African-American women breaking social barriers in the engineering community at NASA. It should be your talent, skills, and work ethic that decide your position at your workplace, not your ethnicity or gender. I found it to be a fun/feel good movie that was well-directed and enjoyable to watch. I found myself caring about the characters and rooting for them throughout the movie which means the characterization was done well.  My favorite part of the movie was the climax when they shot the marine into orbit. The entire movie was building up to this and it was worth the wait.”–John West

“I found “Hidden Figures” to be a very inspiring and thought-provoking film. The primary idea that I took away from the movie was to “look past the numbers.” During the film, NASA mathematicians had difficulty making complex calculations due to there being no existing method available to make them. The protagonist of the film “looked past the numbers” and was able to use her intuition to come up with calculations that fit the situation. In rocket science, numbers are nothing without a physical attribute to tie them to. My favorite part of the movie was when the machine that made quicker calculations than humans malfunctioned and the protagonist was brought in to confirm them. This invoked the idea that machines, although they may be faster, can never replace the need for an engineer.”–Jacob Weinecke

This article is the fifth in a series, new for this school year ’16/’17 of monthly updates that will follow the Fredericksburg STEM Academy/Rocket program. This school is a participant of the SystemsGo STEM program. This series of articles is intended to support, encourage, and challenge students in the program as they share their working status and accomplishments throughout the year in the program. These publications will be available for tags and re-posting.

www.systemsgo.org as always is the place for more information on this program. You may also email them at info@systemsgo.org . Take the time to get your school involved, the future of your students will be greatly benefited.

Fredericksburg’s Annual Church to Church Walk

Last evening, December 13, my husband, Steve and I attended the annual Church to Church  walk put on by the Gillespie County Ministerial Association, here in Fredericksburg. It was Steve’s first time, I have been several times before and always enjoy it. Last night was an amazing experience though. For the first time ever all churches were full to overflowing with walkers participating. As would be expected, many for the first time.  In fact, the count was 393 people. I don’t think I have ever seen more than 150-200 in the years I have attended. It was nice to see more folks coming out to join in the Christmas festivities centered around the Lord.

The program did not disappoint.The theme was “The Coming Of the Lord.” Each church had a sub theme discussed at their stop.

We began at Zion Lutheran Church with a short intro by Reverend Bobby Vitek, GCMA President and also of Holy Ghost Lutheran Church, after which the group joined in the singing of “O come, O Come Emanuel.” Reverend Jeff Hammond of St Barnabas Episcopal Church offered a short reflection on “Wake Us Up to Your Coming.” He talked about how even when our eyes are open we are sometimes not really awake, especially spiritually, and he called for the Lord to really awaken us this Christmas season.  The first stop ended with a choir presentation of “Prepare the Way of the Lord” by the Bethany Chancel Choir.

In spite of some confusion as to which way is East and which is West, Pastor Bobby, gave directions on how to get from Zion to our second stop of Bethany Lutheran Church, and the group was out the door.

Reverend Casey Zesch, Bethany Lutheran, began  the second leg of our journey with responsive readings followed by the singing by the group of the hymn, “Prepare the Royal Highway”. Pastor Travis Meyer, also of Bethany presented thoughts on “Prepare Us for Your Coming”. He spoke about how now that we are awake to Christ’s coming we also have to be  prepared for it. He told the story of St. Nicholas and how he prepared the way by helping those less fortunate. St. Nicholas anonymously threw coins through the window  into the   drying stockings of the daughters of a man who was in danger of having to sell his daughters into slavery just so they would be fed and he could continue to survive. Nicholas’s contributions helped the family to stay together and to survive the hard times they were facing.  We not only prepare ourselves but also the world since Christ is the Way to salvation, the royal highway himself.

“A Christmas  Alleluia” was performed by the Oak Hills Worship Team and then the large throng of walkers headed out the door to Holy Ghost.

Fredericksburg Police provided safe passage across Main Street for the group as they walked and visited in the fast chilling December air.

Reverend David Priem provided the responsive reading at Holy Ghost, with “It Came Upon A Midnight Clear” as the hymn afterwards. Reverend Michael Burdick, Victory Fellowship supplied the reflections on “Open Us to Your Coming.”  He asked us that as we now may be awake, and are preparing for Christ’s coming, are we really open to it? Have we really opened ourselves, our hearts, and our lives for Christ to enter in?

The Victory Fellowship Praise Team invited us to sing along with them on “Joy to the World” after the message. Then once again we were all headed out and  down San Antonio Street to the last stop, St. Mary’s Catholic Church.

“Comfort My People” was sung by the St. Mary’s Choir as walkers filed in. Father Enda McKenna, then began with the responsive readings followed by “Soon and Very Soon” sung by the group. The Reverend George Lumpkin of Fredericksburg United Methodist Church(FUMC) took us through a humorous and surprising message on “Surprise Us By Your Coming.” The basis of this message being that we as Christians wait and pray for God to show up in our lives and then we are surprised when he does. The best excerpt from this being when a friend of his that looked like the traditional picture of Jesus, walked up behind his choir director in church and she turned around and hollered, totally surprised that “Jesus” was standing behind her in church!

The FUMC choir sung “Sing Noel, Sing Hallelujah” after which Father Enda gave a closing benediction and instructions on where to go for refreshments and fellowship to end the evening. For those that had taken their cars on this walk, the evening was at a close after refreshments. The rest of us visited a bit  and then made our way back to Zion and our rides home.

It was a wonderful and blessed evening filled with Christmas joy, songs and spiritual preparedness for the season ahead. I personally enjoy going as a way to get myself in the right frame of mind about the season and what it is truly about.

If you missed it this year, it is an annual event so there will be next year. Keep watch on your local church calendar or the chamber calendar next December. If you are looking for a new tradition to start with your family this is a nice one. God Bless and Merry Christmas!

Happy Thanksgiving All

I had planned to post something  that I had written in the past for Thanksgiving, only to discover I couldn’t find anything I had written in the past for Thanksgiving. How sad, I thought, such a wonderful holiday and I have never taken the time to write a word about it. Well, now I shall remedy that, even if at the moment I have no idea what I plan to say. So you will just have to bear with me a bit!

It is odd that I haven’t taken the time to write about this holiday since I know it is one of my favorites and I know many say the same. I think it stands out as such because it involves all the wonderful aspects of a holiday without so much commercial fuss.  Yes, it does still have some, but not like Christmas, Easter, and Halloween.

It is designed as a holiday of thanks and sharing of all that we have, so we take the time to get together with family and friends and prepare and share food, 1452392_687153997972401_473183348_nfellowship, fun, parades, football, hunting, church, prayer and thanks. We share sheer joy at just being together. Our gifts for this particular holiday are our food, our joy, our love, and our companionship. We wrap them in smiles, hugs, tears and laughter.

We relax, visit, watch football, play games and eat all day long, and in our case late into the night. In fact sometimes it becomes a campfire party later in the evening.

The biggest stress is preparing food and cleaning at the house. Yes I said it that way on purpose because quite often all the cleaning never gets done (mostly dusting, the floors and bathrooms are clean-hey if you can’t handle that, write your name in the dust and then politely leave through the same door in which you came),  and my family never seems to mind. What didn’t get done will get finished as the Christmas decorations go up next week. Besides, I live in a sand field and I can dust today and it will look like I never did by tonight, especially if the windows are open which they have been off and on lately. But I digress, that is not the point. The point is we get together for this holiday to give great thanks and to just plain eat and have fun.

The stressful stuff starts on Friday as we start shopping for that next biggest holiday of Christmas.  But for Thanksgiving Day, wake up, watch the sun rise and go enjoy your family.img_8693 I know that is what I am going to do. Actually most of them are coming to my house. I wish every last one of them was, but unfortunately some due to circumstances just cannot. I pray that where ever they are, they are safe and have a wonderful day anyway.

God bless and give thanks for all you have, and pray for those less fortunate than you that may not being having such a wonderful day. May God bless and keep them and fill their needs as well.

Happy Thanksgiving All may you have a wonderful and blessed day.

Fall Highlights (Oct. 1-Nov. 18)- Fredericksburg’s STEM/Rocket Program

It is mid November and time to  review once more all that the Fredericksburg High School STEM Academy has been working on throughout the past seven weeks.  Each group has new skills they are learning, goals they are working to achieve and events they are working towards.

During the month of October the Freshman visited Caterpillar Manufacturing,  where  Warren Houston, Caterpillar plant manager, acted as the groups’ host during their tour.  They also toured Aqua Power Cutting, where owner BJ Millard showed them around and gave demonstrations.  Mr. Millard’s two sons have both participated in the STEM Academy.

The following photo is from their visit to Caterpillar Manufacturing.

caterpillar-tour

On Monday November 21, they will visit  Toyota, Center for the Intrepid, and Southwest Research Institute (SwRi).

They have also been learning about Electrical Engineering. Keith Kunz a representative of Teledyne, formerly Real Time Systems, was on site Thursday, November 10 for subject presentations.

The juniors have been studying aerodynamic drag, resistance, and impulse momentum theory.  They are completing work on the test stand burn models and the associated fuel grain burn simulations. After this they will be moving on to new heights, attempting to reach 1900 feet on  C6-Estes motors in Generation 3 rockets.  These rockets are designed using the same RockSim software used to design rockets they will launch at Willow City next year. This is a lesson in design and construction and each must match identically their design.

The  whole senior group made a trip to  NASA Johnson Space Center on Monday and Tuesday, November 7 and 8. Only two were unable to attend, one due to family complications and the other was attending State Marching Contest on Monday with the FHS Band but joined the group later.

20161107_130320

On Monday they collectively made a Grant Presentation to NASA. Mr. Matthes reports that, “they did wonderfully.”

20161107_144521  20161107_133653

On Tuesday,  Ian  Kendrick,  Sterling Weaterford,  Nathan Bain and David Becker presented a flight readiness profile. “NASA was impressed with test-stand updates and the focus on analysis and improved data acquisition,” according to Mr. Matthes.

20161108_095221

They also toured Johnson Space Center.

20161108_151017  20161108_123300

20161108_152416

Students had time for fun while in Houston as well.  On Monday,  after dinner, students spent time at Kemah Boardwalk. Interestingly the “Crane Game” was the entertainment of the evening, pitting them against each other to see who could pluck the most stuffed animals.  Reportedly, Ricky Robles was the winner.

20161107_203459  20161107_205034  20161107_210602

Those not involved in Tuesday’s presentation went to Space Center Houston where a good time was had by all.

image2   image1

The STEM Academy would like to extend many thanks to Mr. Logan Minshew, FHS Counselor and CTE coordinator. He took the time to attend this field trip and drive the group.

In other senior news, even though there is still quite a bit more to be done on test-stand, they have made good strides and are progressing forward diligently. They are back at work with rocket design as well.

In a related note, Mr. Matthes reports that they held their first Engineering Advisory Committee meeting on Friday, November 11. Members present were Brian Evans (Space Propulsion Group), Jay Mallinckrodt (Heartland Enterprises), and Scott Netherland (SystemsGo). Mark Cornett, Allen Nance (Teledyne), Luke Morin (SRM Manufacturing), and Logan Minshew (FHS Career and Technology Coordinator) were unable to attend.

This article is the third in a new series of monthly updates that will follow the Fredericksburg STEM Academy/Rocket program. This school is a participant of the SystemsGo STEM program. This series of articles is intended to support, encourage, and challenge students in the program as they share their working status and accomplishments throughout the year in the program. These publications will be available for tags and re-posting.

www.systemsgo.org as always is the place for more information on this program. You may also email them at info@systemsgo.org . Take the time to get your school involved, the future of your students will be greatly benefited.

Happy Halloween-The Final Fare Cafe’

My arms were full of food which I balanced against the wall as I opened the cooler door and reached in groping for the light switch on the wall inside. As my hand finally made purchase of the switch, someone else’s hand clamped tightly over my wrist preventing me from turning the light on. Stunned I shrieked briefly, dropping my load, before standing there wide-eyed, and still, unable to move and unsure if I should. As far as I knew, I was alone, all of the other staff in the restaurant had gone home, so I had no idea who to expect. After a few seconds I finally gathered my wits, or perhaps lost them, and hollered, “Who’s in there? Let go of me and show yourself.”

There was no answer, but the hand suddenly released me and I yanked my arm back and slammed the cooler door. I knew there was a safety latch inside, and whoever was in there could still get out. Grabbing a rolling-pin off a rack near the door, I waited. Nothing happened, not even a sound. My hands shook, and my wrist still felt the imprint of icy fingers as I braved the door again. I grabbed the latch and yanked the door wide backing away quickly. No one came out. I eased closer and peered into the darkness, seeing nothing.

“It’s ok, I’m not going to hurt you,” I said still brandishing my rolling-pin, and slowly reaching around to the switch. This time I flipped it on and as light flooded the cooler, I looked around, seeing absolutely no one, only racks full of food.

I braced the door open and began picking up and moving my supplies into the cooler, keeping a watchful eye. As I turned to leave and reached for the switch, it clicked off, on its own. A coincidence I told myself as I hurried out and shut the door.

I knew no one had walked past me while I loaded supplies into the cooler, but I searched the restaurant looking for the intruder.

The place always took on an eerie silence when it was empty after dark, which I had grown used to, and usually welcomed it after a long busy day. I was always here late preparing things for the breakfast crowd.

The restaurant was a renovated underground basement, beneath an old rock building full of little rooms which had been renovated and filled with stores designed to delight any shopper. Noises like pops, creaks, and whines from the old wood, rock, and metal reacting to temperature changes and wind whistling through old cracks and crevices were normal. In the late hours, the building had a life of its own, with a full chorus of sounds.

I had listened to the old building speak to the night in its usual way as I worked. Sometimes this seemed like being an eaves dropper on a private conversation. This particular evening while I worked, this conversation had seemed even more animated as though some sort of real excitement were being discussed. The wind howled outside, branches scraped against windows, the tin awning above the outside entrance popped and complained as the temperature cooled, and the wood stairs creaked as though they still bore the footfalls of the day. My small noises as I put away cooking pans and shoved boxes seemed loud in the absence of other human noises, but the building seemed as though it were trying to be heard over me tonight. I had become lost in my own thoughts.
If I had been truly present in nature’s conversation on this evening, I would have realized sooner, that the building had gone from highly animated to quiet. It had ceased its conversation, as though in hushed stillness we both waited to see what I would find.

It came in the form of blackness, as every light in the restaurant went out. I moved toward the light switch by the back door where shallow light filtered down the outside stairwell from a street light a few yards away. Just as I reached for it, the light nearest me came on, followed by each light across the restaurant, one by one.

I turned to walk back into the kitchen, watching the lights resume burning; there on the floor in my path set one of the very frying pans I had previously put away. I picked it up glancing around as I did, “Ok, who is here?” I laughed nervously, “Come on, show yourself!”

As the last lights came on, I saw him walk toward me dressed in an old style, gray pen stripe suit and a black top hat. Just for a fleeting second he was there, and then he was gone.

There was the sudden loud crashing of several pots onto the tile floor in the kitchen. I turned in time to see the last of them fall from their shelf as though someone had swept them off from one side to the other. I saw no one there to have caused their descent. I rather cautiously began picking them up and replacing them on the shelf. As I placed the last one back in its spot, another one fell, just missing my head. I tried putting it away several times and each time it clattered past me to the floor.

“Alright, so you don’t want that one up there. How about we just leave it on the stove?” I asked setting it on the nearest burner. As I looked up, I was startled to see him standing next to me. He reached and moved the pan from the front burner to the back, and then took two steps away and disappeared.

I stood still, waiting. Then five minutes after his disappearance, the building resumed it former chatter.

I finished my work looking over my shoulder all evening and then went home. The next day the pan I had left on the stove, had been put away again.

“Thank you to whoever put the pan away that pan I left it on the stove last night,” I said.

“There wasn’t a pan on the stove when we came in,” was the unanimous response.

One of the other cooks stopped and gave me an earnest look, “You met him, didn’t you?”

“Met who?” I asked, not sure I wanted to share the previous evening’ events.

“Dr. Fritz, our resident ghost,” he answered.

I said nothing.

During that day, the good doctor, took a special interest in me. He moved my cup and hid my spatula. Sometimes he would even lay the utensil I was searching for by my side for me to find. I even saw him walk by a few times, as did other staff and even some patrons.

That evening I found myself alone again. I was cleaning the stove which still had hot food on it when he appeared in a rage and threw the pot and its contents at me, and I barely had time to dodge the mass of it. I tried to ignore this and just clean it up, when he shoved another thankfully empty pot off the shelf above onto my head.

As I stood up from cleaning his mess, I realized there were several other ghosts walking the premises. Each wore white gowns that tied shut in the back and they appeared to be searching for someone or something. He was watching them too, looking distraught. Occasionally it seemed they spoke to one another in passing; mumbled voices I could hear, but not understand.

As I worked, they all disappeared again, and it was only him and me. He sat with his head in his hands at a corner table, ignoring me, which I welcomed. I finished my work and left that night.

He greeted me and some of my staff early that next morning with a glass bowl crashing at our feet as we entered the door. Several of the other ghosts were with him. He moved from one to the next to the next as though observing them. At least it was a slow day, but I noticed that these other ghosts, appeared to be patients still dressed in hospital gowns, perhaps whom the good Dr. lost some many decades past, and they seemed to account for his mood.

Some of the patrons observed theses ghosts walking right through tables as though nothing was there. Others would lie down on the tables as though sleeping and simply disappear. None of our regular customers seemed anything but intrigued by all this, leading me to believe I was the last to know of our paranormal friends. The dishes crashing in the kitchen, only mildly startled any of our customers.

I was sure they thought we were really having a bad day back there, and I supposed we were. A bad mood day for the ghost doctor resulted in our subsequent hardships. Before the evening was over I had to get stitches from the cut a large chef’s knife had left across my arm when it sailed through the air at me. Luckily the last of our customers had left just before this happened. Perhaps a courtesy he afforded us.

I have found that the customers come here because they are fascinated with eating where the dead still walk the rooms.
Why do we all still work here? Why not find another job you might ask? The question is, why leave? The good doctor is temperamental, but he hasn’t lost a patient in 100 years, which makes us relatively safe, except minor mishaps of his moods. And the ones he lost are still walk the floors of a century old renovated hospital morgue, known as The Final Fare Café.

Happy Halloween all! Hope you have a fun and safe night!