Texas Hill Country – Page 10 – On the Wings of Angels

Rockets 2017 Begins Next Week With a New Venue in New Mexico

The launch of Rockets 2017 blasts skyward on April 27th from a brand new venue this year as six schools from New Mexico join the SystemsGo program. Last year instructors from these schools came to Willow City to observe, learn and participate in launches in order to implement the program at a new site in New Mexico.

SystemsGo New Mexico is headed up by David Willden and currently includes the schools of Carlsbad High School, Hobbs High School, Jal High School, Lake Arthur High School, Loving High School and Lovington High School. This is their first year in the program and they will attempt launching a total of 10 one pound/one mile rockets at a location near Jal, New Mexico. This new site, called the Discovery Education Launch Pad, will be open to public viewing of launches, as are all sites except White Sands Missile Range this year. A link to location information and a map link are available at http://www.systemsgo.org/events/ .

The site will be open for admittance at 8:00 a.m. and launches will commence at 8:30 a.m.

If you plan to attend Jal or any of this year’s launches please register for your attendance ticket at http://www.systemsgo.org/save-the-date-for-rockets-2017/ or they may be gotten at the gate. These are free but required for admittance to each site. Reserving them ahead at the website is preferred to obtaining them at the gate because the latter slows entrance to the site and may result in you missing the viewing of your intended launch.

You may also view any of the launches except WSMR on Livestream. That link will be available on the SystemsGo website closer to the launch. The New SystemsGo New Mexico also has a twitter feed you can join to keep up to date on what they are doing. That link is https://twitter.com/SystemsGoNM

The schedule of launches for Jal is also available at http://www.systemsgo.org/save-the-date-for-rockets-2017/ . I will post it here for launch day next week as well. I want it to be as accurate as possible so I will refrain from posting it now in case there are any late changes.

If you are in the Jal, New Mexico area, keep an eye out for this new vehicle. It just rolled out recently to support the new launch group.

If you follow this program and like to view the launches, Rockets 2017 will continue with two more launches in May. The first will be held in Smith Point just south of Anahuac, Texas for schools in the Houston area, on the weekend of May 12-14, 2017. If you have been to the Houston area launches in the past you may want to check out the SystemsGo website for information because this is a new location for that area this year. Information and a map link are available.

Next the Stewart Ranch in Willow City, Texas will host the largest of the now three launch events on the weekend of May 18-21, 2017. This testing site covers the Fredericksburg and Hill Country area schools and all Texas schools not participating in the Houston launches.

Please watch the SystemsGo website, SystemsGo Facebook page, SystemsGo Twitter feed: https://twitter.com/SystemsGoNews and this blog for upcoming information on theses events.

The senior groups are tentatively scheduled to launch their Goddard level rockets at White Sands Missile Range (WSMR) in New Mexico the week of June 26-30. These are not available for public viewing or Livestream due to being tested on a military facility, but blog and SystemsGo updates will be posted online as available during that week.

More event details will be available here in upcoming days as events get closer. Daily reports featuring schedules, school names, results, pictures and some editorial content will be posted during the events.

www.systemsgo.org as always is the place for more information on this program. You may also email them at info@systemsgo.org . Take the time to get your school involved, the future of your students will be greatly benefited.

Fredericksburg’s STEM Academy/Rocket Program-Spring Term Update #2 (February 21-March 31)

April 1st is tomorrow, so time is becoming a factor for the Fredericksburg STEM Academy as launch dates approach for the junior and senior groups. There are no fools here though, just several groups of future engineers working hard to meet their timelines. With March behind them there is only a little over 6 weeks left for the junior group until Rockets 2017 and their May 18th test date. The seniors have approximately 60 days as Redbird 18 is scheduled for completion two weeks before school ends to allow for preliminary systems tests.

More on these groups and their current status reports will be later in the article.

Sophomores are currently taking mid-term exams. This is due to the new schedule for classes this year which puts a full year’s curriculum into one standard semester. They have been busy using AutoCAD to create multi view drawings of objects. Dimensioning and tolerancing of these drawings will be learned next, followed by isometric drawings and 3D modeling. The students have been printing models of their multiview drawings using the newly installed 3D printer. All 3 3D printers available now are working well.

The student aide, Colby Marthaler has also been using the 3D printers to print all the parts necessary to create a model of the Falcon 9 Rocket SpaceX uses to transport satellites and the Dragon spacecraft into orbit.

Juniors had CDR’s (Critical Design Reviews) due for their rockets by March 30. Unfortunately they are just getting to them. Students will have to be studious in order to meet their May 18th launch date due to being behind schedule at this time. The payload for this rocket is a rapid growth slime mold. They have designed the payload in order to create a controlled experiment in which they should be able to determine how flight impacts the mold’s growth, negatively or positively.

The design criteria for their rocket is a one pound payload and breaking the speed of sound therefore achieving a transonic state. Currently neither criteria has been met so the group has more work to do to accomplish their goals by their launch date.

Their mid-term which is a LabVIEW development project has come along well. They are creating a workable program which requires specific methods and functions in order to attain a goal of designing and fabricating a micro test stand for Estes motors. They will be connecting a (DAQ) Data Acquisition unit to a computer and registering it to that computer in order to read sensors, and programming a control and DAQ Virtual Instrument in LabView in order to run the test stand.

March began with more fuel grain tests at test stand. Two tests were completed in the first week alone, consisting of many hours of work to accomplish each. A temperature sensor indicated a high enough value in order to cause a programmed shut down on the first test that week. After investigation, it was found that a ‘electrical noise’ caused an anomaly which gave the sensor its reading, and that it was in fact not outside normal operating parameters. The actual test did not experience any temperature concerns.

The same fuel grain was able to be used again in a 20 second burn, which allowed students to achieve a cumulative 40 second burn on one fuel grain. The shut down was disabled for the second burn, allowing the data to still record the temperatures caused by the ‘electrical noise’, but not to stop the burn test and it was a full success without any further exceptions.

Mr. Matthes was very pleased with these burns and stated , “All data was processed and showed again the test stand was producing verifiable data similar to theoretical expectations.”

Students began another round of testing this week. Six new fuel grains will be tested accounting for three tests each of two different fuel types students have been working on. The hope is that they will cycle through smoothly due to the fuel grains being prepped prior to testing.

Here Hannah Boubel is working with graphite in order to make ablative, which is a sacrificial material in the pre and post combustion chamber so the burn does not penetrate the liner and steel test cell.

In this photo, Sterling Weatherford is preparing a fuel grain for installation in to the test cell.

Along with test stand work, the students have been hard at work on Rebird 18, their Goddard level rocket slated to launch at White Sands Missile Range on June 27th. Students have already contracted with Heartland Enterprises and SRM Manufacturing for fabrications and parts have been supplied to them.

At this point in the process students are learning true cause and effect, and just how it can affect their outcomes. The entire success of the vehicle from this point forward is contingent on the group not only working as a team as a whole, but also for each individual team to stay on top of their work and outcome. Many of the components are dependent on the progress of the others. Delays on one team’s element directly affects the next team creating delays down the line and strained time schedules. Individual testing is conducted on each piece as it is finished. Full up integration and testing of any systems that allow for ground based testing is scheduled for two weeks from the end of school when the rocket is due to be complete.

“They are well on their way to a successful vehicle. The seniors will not have the luxury of adopting senioritis as there is still significant and mutually dependent work to be accomplished,” Mr. Matthes reported. “These next 60 days will be a true test of their team work, peer loyalty and persistence. ”

As the end of the school year approaches, these students are becoming more and more adept in their learning and knowledge as young and capable engineers. Their end of year rockets will be a testament to that learning, time and ability.

According to Mr. Matthes, “Students are becoming ‘plagued’ with knowledge and experience: the more they know and become aware of, the more they have to take into consideration and the more challenging the process becomes. However, it also makes for conditions more aligned with success. Additionally, if we consider these students products of FHS and the FHS Engineering, then they should be welcomed by a market hungry for what they have to offer.”

The senior group is tentatively scheduled to launch their Goddard level rocket at White Sands Missile Range (WSMR) in New Mexico the week of June 26-30. The current schedule for that event is as follows:

Sunday, Jun 25th Travel Day

Monday, Jun 26th T-1 and Site Set up/Rocket Prep at WC-50

Tuesday, Jun 27th Launch Day One (Three Rockets – Fredericksburg, Union Grove, Alamo Heights)

Wednesday, Jun 28th Launch Day Two (Three Rockets – Anahuac, Booker T. #1, Booker T. #2)

Thursday, Jun 29th Contingency Day

Friday, Jun 30th Travel Day

There are also launches in Houston for schools in that area the weekend of May 12-14, 2017. New for this year the Hobbs, New Mexico group of schools will launch 1/1 rockets in Jal, New Mexico on April 27, 2017, this site will also be open to public viewing.

This article is the sixth in a series, new for this school year ’16/’17 of monthly updates that will follow the Fredericksburg STEM Academy/Rocket program. This school is a participant of the SystemsGo STEM program. This series of articles is intended to support, encourage, and challenge students in the program as they share their working status and accomplishments throughout the year in the program. These publications will be available for tags and re-posting.

Second Term Update #1 (January 9-February 21)-Fredericksburg’s STEM Academy/Rocket Program

January is past and February is waning quickly, but the spring program is really building. There are big goals and events for each class group. This semester is where their learning hits the pad literally for the junior and senior groups as they build toward Rockets 2017 and their end of class projects. There are three class groups this semester as the sophomore class begins study and the freshman class is complete until they re-enter the program as sophomores in January of 2018.

The freshman have moved on due to the new accelerated block schedule, but at the end of the semester they all agreed that communication skills were what they felt they had developed the most. They found themselves to be much more comfortable and proficient when speaking in public. Their final projects, the orange juice production plants went well as reported by Mr. Matthes. The students were all very excited about the class and course study, but not about having to wait a whole year to return to the STEM Academy.

The sophomores are just beginning their 5th week of studies since they are new to the program for this year. Their studies to this point included learning to hand draw multi-view drawings, interpreting 3D objects, and learning engineering lettering which they have recently completed. With these skills accomplished, they will be moving on to the ACC Auto CAD course within the next week.

These students have been using two older 3D printers for these projects. The printers have a relatively small build space and so limit what the students can produce on them. The district has recently received a new larger 3D printer, the MakerBot Z18 which will be available later this month. This will be a benefit to these students as well as both upperclassmen groups as it will allow for much larger production pieces and will give them the ability to prototype designs.

While junior and senior classes will use this printer more often, the sophomores will be the first to learn how to use it. Even though their current course study will still be focused on smaller printing jobs, prototyping and future uses will necessitate knowing how to use the new printer.

Juniors began work on January 23, on their transonic rocket that they will launch in Willow City in May. They have begun the initial stages of the Design and Development processes. A timeline and a problem statement have been created, and they are about midway through the research process.

They have a Critical Design Review (CDR) due before spring break. Unfortunately they have not been able to narrow down the scope of their research as of yet. This keeps them spread out as a team, and means they have to make up ground in order to make the pre-spring break CDR deadline.

They are researching rapid growth organisms for a possible payload for the rocket, and hope to be able to study how flight affects their growth.

On Friday, February 17, the juniors along with sophomores, Gloria Burns and Eston Cooke joined the juniors as Brian Evans of Space Propulsion Group provided instruction on the basics of mathematical modeling. At the end of the presentation, juniors had the opportunity to present models they had developed and then also do trouble shooting on their profiles.

Sophomores Gloria Burns and Eston Cooke with Dr. Brian Evans.

The junior students were very receptive to Mr. Evans and his instruction, alleviating numerous roadblocks and enabling rapid progress in their modelling.

Here juniors, Harrison Spisak and Jacob Weinecke make their presentations their burn model to Dr. Evans.

“Dr. Evans was down to earth and made comprehension of something really difficult, easy.”-Corbin Smajstrla

“It was nice to have rocket science explained so it wasn’t rocket science.” -Evan Knapp

Juniors have been officially invited to begin learning and participation in fuel grain motor test burns, but currently seniors are the only ones conducting any test burns.

Corbin Smajstrla and Dr. Evans at the board.

The seniors conducted their first hot fire test on Friday, February 17, while Dr. Evans from the Space Propulsion Group was in attendance. They accomplished a 10 second burn of Low Density Polyethylene (LDPE).

A still photo from the burn test.

According to Mr. Matthes, ” The test was extremely successful with outstanding data acquisition that showed the motor preformed nominally, according to expected design parameters. This was very exciting to have such a good, clean burn, good data, and fitting expected performance.”

Heartland Enterprises and SRM Manufacturing created a newly designed injector plate. This allowed the class to keep their Friday deadline. In spite of the piece needing to be manufactured quickly for the project, these companies came through and the product was, “beautifully machined and performed with 10% of expectation regarding oxidizer mass flow rate,” stated Mr. Matthes.

On January 27, the Fredericsburg Middle School 7th grade GT(Gifted and Talented) group presented their payload for the Redbird #18 Rocket to the senior STEM class. It consisted of a group of sensors to measure UV Light, methane, acceleratometer, and barometric pressure.

The 7th grade GT class presentation.

New this school year, Mr. Matthes started requiring after school and extra curricular hour work on senior projects. When asked how this senior group was doing with this on their project, here is what he had to say about the group.

“There have been a solid group of students who have been putting time in during study halls and some others who have been able to commit extended numbers of hours outside of school time to keep things moving forward. These senior students have worked phenomenally. They bit off a lot to accomplish this year and are on target to meet all of their expectations. It is quite remarkable having the opportunity and privilege to work with them. A substitute recently commented that during my absence, walking into the classroom after the passing period between classes was like walking into a full-fledged workforce environment where students were all fully engaged, scheduling, designing, problem solving, and just plain working without any instruction to do so. I believe the skills these students have honed over the last 4 years through this program and all their other coursework has created a ‘product’ that any college, industry, and organization would wish to recruit.”

Keep up the great work, seniors, what an amazing and glowing endorsement.

If you follow this program and like to view the launches, Rockets 2017 will be held at the Stewart Ranch in Willow City, Texas on the weekend of May 18-21, 2017. This testing site is open to the public. Please watch the SystemsGo website and this blog for upcoming information on the event. The FHS junior group will be testing their rockets on Thursday, May 18, 2017. The senior group is tentatively scheduled to launch their Goddard level rocket at White Sands Missile Range (WSMR) in New Mexico the week of June 26-30. There are also launches in Houston for schools in that area the weekend of May 12-14, 2017. New for this year the Hobbs, New Mexico group of schools will launch 1/1 rockets in Jal, New Mexico on April 27, 2017, this site will also be open to public viewing.

The STEM Academy group was encouraged to attend the movie, “Hidden Figures” on Friday, February 10th at Fritztown Cinema. About 35 students from the program attended. Here is what a few of them had to say about the movie:

“The movie was about African-American women breaking social barriers in the engineering community at NASA. It should be your talent, skills, and work ethic that decide your position at your workplace, not your ethnicity or gender. I found it to be a fun/feel good movie that was well-directed and enjoyable to watch. I found myself caring about the characters and rooting for them throughout the movie which means the characterization was done well. My favorite part of the movie was the climax when they shot the marine into orbit. The entire movie was building up to this and it was worth the wait.”–John West

“I found “Hidden Figures” to be a very inspiring and thought-provoking film. The primary idea that I took away from the movie was to “look past the numbers.” During the film, NASA mathematicians had difficulty making complex calculations due to there being no existing method available to make them. The protagonist of the film “looked past the numbers” and was able to use her intuition to come up with calculations that fit the situation. In rocket science, numbers are nothing without a physical attribute to tie them to. My favorite part of the movie was when the machine that made quicker calculations than humans malfunctioned and the protagonist was brought in to confirm them. This invoked the idea that machines, although they may be faster, can never replace the need for an engineer.”–Jacob Weinecke

This article is the fifth in a series, new for this school year ’16/’17 of monthly updates that will follow the Fredericksburg STEM Academy/Rocket program. This school is a participant of the SystemsGo STEM program. This series of articles is intended to support, encourage, and challenge students in the program as they share their working status and accomplishments throughout the year in the program. These publications will be available for tags and re-posting.

Fredericksburg’s Annual Church to Church Walk

Last evening, December 13, my husband, Steve and I attended the annual Church to Church walk put on by the Gillespie County Ministerial Association, here in Fredericksburg. It was Steve’s first time, I have been several times before and always enjoy it. Last night was an amazing experience though. For the first time ever all churches were full to overflowing with walkers participating. As would be expected, many for the first time. In fact, the count was 393 people. I don’t think I have ever seen more than 150-200 in the years I have attended. It was nice to see more folks coming out to join in the Christmas festivities centered around the Lord.

The program did not disappoint.The theme was “The Coming Of the Lord.” Each church had a sub theme discussed at their stop.

We began at Zion Lutheran Church with a short intro by Reverend Bobby Vitek, GCMA President and also of Holy Ghost Lutheran Church, after which the group joined in the singing of “O come, O Come Emanuel.” Reverend Jeff Hammond of St Barnabas Episcopal Church offered a short reflection on “Wake Us Up to Your Coming.” He talked about how even when our eyes are open we are sometimes not really awake, especially spiritually, and he called for the Lord to really awaken us this Christmas season. The first stop ended with a choir presentation of “Prepare the Way of the Lord” by the Bethany Chancel Choir.

In spite of some confusion as to which way is East and which is West, Pastor Bobby, gave directions on how to get from Zion to our second stop of Bethany Lutheran Church, and the group was out the door.

Reverend Casey Zesch, Bethany Lutheran, began the second leg of our journey with responsive readings followed by the singing by the group of the hymn, “Prepare the Royal Highway”. Pastor Travis Meyer, also of Bethany presented thoughts on “Prepare Us for Your Coming”. He spoke about how now that we are awake to Christ’s coming we also have to be prepared for it. He told the story of St. Nicholas and how he prepared the way by helping those less fortunate. St. Nicholas anonymously threw coins through the window into the drying stockings of the daughters of a man who was in danger of having to sell his daughters into slavery just so they would be fed and he could continue to survive. Nicholas’s contributions helped the family to stay together and to survive the hard times they were facing. We not only prepare ourselves but also the world since Christ is the Way to salvation, the royal highway himself.

“A Christmas Alleluia” was performed by the Oak Hills Worship Team and then the large throng of walkers headed out the door to Holy Ghost.

Fredericksburg Police provided safe passage across Main Street for the group as they walked and visited in the fast chilling December air.

Reverend David Priem provided the responsive reading at Holy Ghost, with “It Came Upon A Midnight Clear” as the hymn afterwards. Reverend Michael Burdick, Victory Fellowship supplied the reflections on “Open Us to Your Coming.” He asked us that as we now may be awake, and are preparing for Christ’s coming, are we really open to it? Have we really opened ourselves, our hearts, and our lives for Christ to enter in?

The Victory Fellowship Praise Team invited us to sing along with them on “Joy to the World” after the message. Then once again we were all headed out and down San Antonio Street to the last stop, St. Mary’s Catholic Church.

“Comfort My People” was sung by the St. Mary’s Choir as walkers filed in. Father Enda McKenna, then began with the responsive readings followed by “Soon and Very Soon” sung by the group. The Reverend George Lumpkin of Fredericksburg United Methodist Church(FUMC) took us through a humorous and surprising message on “Surprise Us By Your Coming.” The basis of this message being that we as Christians wait and pray for God to show up in our lives and then we are surprised when he does. The best excerpt from this being when a friend of his that looked like the traditional picture of Jesus, walked up behind his choir director in church and she turned around and hollered, totally surprised that “Jesus” was standing behind her in church!

The FUMC choir sung “Sing Noel, Sing Hallelujah” after which Father Enda gave a closing benediction and instructions on where to go for refreshments and fellowship to end the evening. For those that had taken their cars on this walk, the evening was at a close after refreshments. The rest of us visited a bit and then made our way back to Zion and our rides home.

It was a wonderful and blessed evening filled with Christmas joy, songs and spiritual preparedness for the season ahead. I personally enjoy going as a way to get myself in the right frame of mind about the season and what it is truly about.

If you missed it this year, it is an annual event so there will be next year. Keep watch on your local church calendar or the chamber calendar next December. If you are looking for a new tradition to start with your family this is a nice one. God Bless and Merry Christmas!

Happy Thanksgiving All

I had planned to post something that I had written in the past for Thanksgiving, only to discover I couldn’t find anything I had written in the past for Thanksgiving. How sad, I thought, such a wonderful holiday and I have never taken the time to write a word about it. Well, now I shall remedy that, even if at the moment I have no idea what I plan to say. So you will just have to bear with me a bit!

It is odd that I haven’t taken the time to write about this holiday since I know it is one of my favorites and I know many say the same. I think it stands out as such because it involves all the wonderful aspects of a holiday without so much commercial fuss. Yes, it does still have some, but not like Christmas, Easter, and Halloween.

It is designed as a holiday of thanks and sharing of all that we have, so we take the time to get together with family and friends and prepare and share food, fellowship, fun, parades, football, hunting, church, prayer and thanks. We share sheer joy at just being together. Our gifts for this particular holiday are our food, our joy, our love, and our companionship. We wrap them in smiles, hugs, tears and laughter.

We relax, visit, watch football, play games and eat all day long, and in our case late into the night. In fact sometimes it becomes a campfire party later in the evening.

The biggest stress is preparing food and cleaning at the house. Yes I said it that way on purpose because quite often all the cleaning never gets done (mostly dusting, the floors and bathrooms are clean-hey if you can’t handle that, write your name in the dust and then politely leave through the same door in which you came), and my family never seems to mind. What didn’t get done will get finished as the Christmas decorations go up next week. Besides, I live in a sand field and I can dust today and it will look like I never did by tonight, especially if the windows are open which they have been off and on lately. But I digress, that is not the point. The point is we get together for this holiday to give great thanks and to just plain eat and have fun.

The stressful stuff starts on Friday as we start shopping for that next biggest holiday of Christmas. But for Thanksgiving Day, wake up, watch the sun rise and go enjoy your family. I know that is what I am going to do. Actually most of them are coming to my house. I wish every last one of them was, but unfortunately some due to circumstances just cannot. I pray that where ever they are, they are safe and have a wonderful day anyway.

God bless and give thanks for all you have, and pray for those less fortunate than you that may not being having such a wonderful day. May God bless and keep them and fill their needs as well.

Happy Thanksgiving All may you have a wonderful and blessed day.

Fall Highlights (Oct. 1-Nov. 18)- Fredericksburg’s STEM/Rocket Program

It is mid November and time to review once more all that the Fredericksburg High School STEM Academy has been working on throughout the past seven weeks. Each group has new skills they are learning, goals they are working to achieve and events they are working towards.

During the month of October the Freshman visited Caterpillar Manufacturing, where Warren Houston, Caterpillar plant manager, acted as the groups’ host during their tour. They also toured Aqua Power Cutting, where owner BJ Millard showed them around and gave demonstrations. Mr. Millard’s two sons have both participated in the STEM Academy.

The following photo is from their visit to Caterpillar Manufacturing.

On Monday November 21, they will visit Toyota, Center for the Intrepid, and Southwest Research Institute (SwRi).

They have also been learning about Electrical Engineering. Keith Kunz a representative of Teledyne, formerly Real Time Systems, was on site Thursday, November 10 for subject presentations.

The juniors have been studying aerodynamic drag, resistance, and impulse momentum theory. They are completing work on the test stand burn models and the associated fuel grain burn simulations. After this they will be moving on to new heights, attempting to reach 1900 feet on C6-Estes motors in Generation 3 rockets. These rockets are designed using the same RockSim software used to design rockets they will launch at Willow City next year. This is a lesson in design and construction and each must match identically their design.

The whole senior group made a trip to NASA Johnson Space Center on Monday and Tuesday, November 7 and 8. Only two were unable to attend, one due to family complications and the other was attending State Marching Contest on Monday with the FHS Band but joined the group later.

On Monday they collectively made a Grant Presentation to NASA. Mr. Matthes reports that, “they did wonderfully.”

On Tuesday, Ian Kendrick, Sterling Weaterford, Nathan Bain and David Becker presented a flight readiness profile. “NASA was impressed with test-stand updates and the focus on analysis and improved data acquisition,” according to Mr. Matthes.

They also toured Johnson Space Center.

Students had time for fun while in Houston as well. On Monday, after dinner, students spent time at Kemah Boardwalk. Interestingly the “Crane Game” was the entertainment of the evening, pitting them against each other to see who could pluck the most stuffed animals. Reportedly, Ricky Robles was the winner.

Those not involved in Tuesday’s presentation went to Space Center Houston where a good time was had by all.

The STEM Academy would like to extend many thanks to Mr. Logan Minshew, FHS Counselor and CTE coordinator. He took the time to attend this field trip and drive the group.

In other senior news, even though there is still quite a bit more to be done on test-stand, they have made good strides and are progressing forward diligently. They are back at work with rocket design as well.

In a related note, Mr. Matthes reports that they held their first Engineering Advisory Committee meeting on Friday, November 11. Members present were Brian Evans (Space Propulsion Group), Jay Mallinckrodt (Heartland Enterprises), and Scott Netherland (SystemsGo). Mark Cornett, Allen Nance (Teledyne), Luke Morin (SRM Manufacturing), and Logan Minshew (FHS Career and Technology Coordinator) were unable to attend.

This article is the third in a new series of monthly updates that will follow the Fredericksburg STEM Academy/Rocket program. This school is a participant of the SystemsGo STEM program. This series of articles is intended to support, encourage, and challenge students in the program as they share their working status and accomplishments throughout the year in the program. These publications will be available for tags and re-posting.

Happy Halloween-The Final Fare Cafe’

My arms were full of food which I balanced against the wall as I opened the cooler door and reached in groping for the light switch on the wall inside. As my hand finally made purchase of the switch, someone else’s hand clamped tightly over my wrist preventing me from turning the light on. Stunned I shrieked briefly, dropping my load, before standing there wide-eyed, and still, unable to move and unsure if I should. As far as I knew, I was alone, all of the other staff in the restaurant had gone home, so I had no idea who to expect. After a few seconds I finally gathered my wits, or perhaps lost them, and hollered, “Who’s in there? Let go of me and show yourself.”

There was no answer, but the hand suddenly released me and I yanked my arm back and slammed the cooler door. I knew there was a safety latch inside, and whoever was in there could still get out. Grabbing a rolling-pin off a rack near the door, I waited. Nothing happened, not even a sound. My hands shook, and my wrist still felt the imprint of icy fingers as I braved the door again. I grabbed the latch and yanked the door wide backing away quickly. No one came out. I eased closer and peered into the darkness, seeing nothing.

“It’s ok, I’m not going to hurt you,” I said still brandishing my rolling-pin, and slowly reaching around to the switch. This time I flipped it on and as light flooded the cooler, I looked around, seeing absolutely no one, only racks full of food.

I braced the door open and began picking up and moving my supplies into the cooler, keeping a watchful eye. As I turned to leave and reached for the switch, it clicked off, on its own. A coincidence I told myself as I hurried out and shut the door.

I knew no one had walked past me while I loaded supplies into the cooler, but I searched the restaurant looking for the intruder.

The place always took on an eerie silence when it was empty after dark, which I had grown used to, and usually welcomed it after a long busy day. I was always here late preparing things for the breakfast crowd.

The restaurant was a renovated underground basement, beneath an old rock building full of little rooms which had been renovated and filled with stores designed to delight any shopper. Noises like pops, creaks, and whines from the old wood, rock, and metal reacting to temperature changes and wind whistling through old cracks and crevices were normal. In the late hours, the building had a life of its own, with a full chorus of sounds.

I had listened to the old building speak to the night in its usual way as I worked. Sometimes this seemed like being an eaves dropper on a private conversation. This particular evening while I worked, this conversation had seemed even more animated as though some sort of real excitement were being discussed. The wind howled outside, branches scraped against windows, the tin awning above the outside entrance popped and complained as the temperature cooled, and the wood stairs creaked as though they still bore the footfalls of the day. My small noises as I put away cooking pans and shoved boxes seemed loud in the absence of other human noises, but the building seemed as though it were trying to be heard over me tonight. I had become lost in my own thoughts.
If I had been truly present in nature’s conversation on this evening, I would have realized sooner, that the building had gone from highly animated to quiet. It had ceased its conversation, as though in hushed stillness we both waited to see what I would find.

It came in the form of blackness, as every light in the restaurant went out. I moved toward the light switch by the back door where shallow light filtered down the outside stairwell from a street light a few yards away. Just as I reached for it, the light nearest me came on, followed by each light across the restaurant, one by one.

I turned to walk back into the kitchen, watching the lights resume burning; there on the floor in my path set one of the very frying pans I had previously put away. I picked it up glancing around as I did, “Ok, who is here?” I laughed nervously, “Come on, show yourself!”

As the last lights came on, I saw him walk toward me dressed in an old style, gray pen stripe suit and a black top hat. Just for a fleeting second he was there, and then he was gone.

There was the sudden loud crashing of several pots onto the tile floor in the kitchen. I turned in time to see the last of them fall from their shelf as though someone had swept them off from one side to the other. I saw no one there to have caused their descent. I rather cautiously began picking them up and replacing them on the shelf. As I placed the last one back in its spot, another one fell, just missing my head. I tried putting it away several times and each time it clattered past me to the floor.

“Alright, so you don’t want that one up there. How about we just leave it on the stove?” I asked setting it on the nearest burner. As I looked up, I was startled to see him standing next to me. He reached and moved the pan from the front burner to the back, and then took two steps away and disappeared.

I stood still, waiting. Then five minutes after his disappearance, the building resumed it former chatter.

I finished my work looking over my shoulder all evening and then went home. The next day the pan I had left on the stove, had been put away again.

“Thank you to whoever put the pan away that pan I left it on the stove last night,” I said.

“There wasn’t a pan on the stove when we came in,” was the unanimous response.

One of the other cooks stopped and gave me an earnest look, “You met him, didn’t you?”

“Met who?” I asked, not sure I wanted to share the previous evening’ events.

“Dr. Fritz, our resident ghost,” he answered.

I said nothing.

During that day, the good doctor, took a special interest in me. He moved my cup and hid my spatula. Sometimes he would even lay the utensil I was searching for by my side for me to find. I even saw him walk by a few times, as did other staff and even some patrons.

That evening I found myself alone again. I was cleaning the stove which still had hot food on it when he appeared in a rage and threw the pot and its contents at me, and I barely had time to dodge the mass of it. I tried to ignore this and just clean it up, when he shoved another thankfully empty pot off the shelf above onto my head.

As I stood up from cleaning his mess, I realized there were several other ghosts walking the premises. Each wore white gowns that tied shut in the back and they appeared to be searching for someone or something. He was watching them too, looking distraught. Occasionally it seemed they spoke to one another in passing; mumbled voices I could hear, but not understand.

As I worked, they all disappeared again, and it was only him and me. He sat with his head in his hands at a corner table, ignoring me, which I welcomed. I finished my work and left that night.

He greeted me and some of my staff early that next morning with a glass bowl crashing at our feet as we entered the door. Several of the other ghosts were with him. He moved from one to the next to the next as though observing them. At least it was a slow day, but I noticed that these other ghosts, appeared to be patients still dressed in hospital gowns, perhaps whom the good Dr. lost some many decades past, and they seemed to account for his mood.

Some of the patrons observed theses ghosts walking right through tables as though nothing was there. Others would lie down on the tables as though sleeping and simply disappear. None of our regular customers seemed anything but intrigued by all this, leading me to believe I was the last to know of our paranormal friends. The dishes crashing in the kitchen, only mildly startled any of our customers.

I was sure they thought we were really having a bad day back there, and I supposed we were. A bad mood day for the ghost doctor resulted in our subsequent hardships. Before the evening was over I had to get stitches from the cut a large chef’s knife had left across my arm when it sailed through the air at me. Luckily the last of our customers had left just before this happened. Perhaps a courtesy he afforded us.

I have found that the customers come here because they are fascinated with eating where the dead still walk the rooms.
Why do we all still work here? Why not find another job you might ask? The question is, why leave? The good doctor is temperamental, but he hasn’t lost a patient in 100 years, which makes us relatively safe, except minor mishaps of his moods. And the ones he lost are still walk the floors of a century old renovated hospital morgue, known as The Final Fare Café.

Happy Halloween all! Hope you have a fun and safe night!

September Highlights- Fredericksburg’s STEM/Rocket Program

The school year is now into it’s seventh week. September has come and gone and the Fredericksburg High School STEM Academy has been working steady at all levels. Each group has new skills they are learning, goals they are working to achieve and events they are working towards.

Mr. Matthes says that, ” The Freshman are great! Already I have seen an improvement in their presentation skills. They have also been successful in finishing the structural engineering fix for the SystemsGo launch tower, and have followed up with a PMA (post mission analysis) and current event report.”

This is the second period Freshman class with their structures. Students including in the picture, in no alphabetical order are as follows: Jowad Aysheh, Gloria Burns, Luke Duderstadt, Manuel Enciso, Jack Fox, Jack Gallagher, Jacob Hinterlach, Thomas Johnson, Troy Kneese, Aquilino Perez, Zoe Rivera, Darien Robles, Jessen Stableford, Noah Stotz, Deja Turkett, Alek Vasquez, Calissa Vollmar, Dalton Waters, Joshua Wienecke, and Zachary Willis.

This is the third period Freshman class with their structures. Students including in the picture, in alphabetical order are as follows: Dylan Ahrens, Jarrett Beard, Jorge Giral, Blake Boubel, Chad Braden, Jacob Brown, Esten Cooke, Samuel Cowsar, Ryan Davis, Gavin Eckert, Tucker Elliot, Frank Fackovec, Cathryn Huff, Brendon Huynh, Abel Jaimes, Ryan Majors, Antonio Martinez, Tristan McDonald, Gabriela Moreno, Robert Sanchez, Landon Sparrow, Carl Wilger, Lane Wallendorf, and Landon West.

The freshman will be traveling to several companies to investigate how engineering plays a part in their industries. This will take place over the next three months in three separate trips. Included in these trips are: Caterpillar Manufacturing, Aqua Power Cutting, Soutwest Research Institute (SwRI), Toyota Manufacturing, and Center for the Intrepid, all out-of-town trips, and Fischer and Wieser, Heartland Enterprises, Ltd. , Swissomation, Kager Industries, and Rode’s Iron and Pipe locally. During the month of October they will visit Caterpillar Manufacturing and Aqua Power Cutting.

The Juniors are currently working in the R&D (Research and Development) element of the curriculum after having completed building and launching their Generation 1 model rockets. During this phase they are working on modeling the motor burn.

Junior class with the Generation 1 rockets.

Seniors are alternating between rocket history and work on the test stand and testbed. They are currently in a break from the history but will rejoin it in a couple of weeks. Mean while they have conducted successful CDR’s (critical design review) for test stand that generated positive and developmental feedback. They have also had success updating the testbed. Wiring and programming issues have been corrected, they were able to create a new tank system which will increase safety in the fill and weigh of nitrous operating systems, as well as succeeding in making the testbed more frictionless. Their senior rocket is still in the works as they continue in the design development of the vehicle.

New this year, the seniors created rocket history children’s books. Students will be doing recordings of themselves reading the books, and both the books and the audios will be sent to the Fredericksburg Elementary School where students there will be able to read the books and hear the high school authors read the books to them.

According to Mr. Matthes, “Their rocket history children’s books were awesome!”

On November 7 & 8, the senior group has a chance to go to the NASA Johnson Space Center, for flight profile reviews, grant updates, and a possible preliminary design review. Three students will go for sure, and those will be named at a later date.

Seniors, here is your challenge for the month, according to Mr Matthes, “If you complete the analysis of historic test data from the teststand then you will all be eligible to attend this trip. He would like to see that happen and take you all. Can you meet the challenge? Next month’s edition of this article series will publish the answer to this challenge. Now is your chance to show my readers and Mr. Matthes that you can meet the challenge.

This article is the second in a new series of monthly updates that will follow the Fredericksburg STEM Academy/Rocket program. This school is a participant of the SystemsGo STEM program. This series of articles is intended to support, encourage, and challenge students in the program as they share their working status and accomplishments throughout the year in the program. These publications will be available for tags and re-posting.

What’s All This About Rockets: Success Stories-Anissa Kneese

Welcome back to Rocket Success stories. This is the second installment of this series of Interview style articles, in which we meet individuals that studied under the SystemsGo STEM program and have gone on to build their futures on the skills it teaches. Last month we met, Robert Deaver, a 1996 graduate of the program. This month we are looking at a young lady that is a more recent graduate also from Fredericksburg High School in 2014, miss Anissa Kneese.

Anissa is currently a college student at Texas A&M, which allows us to talk with her now and to check back with her and see exactly where her education and career choices have taken her in the future. This is in a way, the middle of her path, but the drive she has to complete her engineering goals are a direct correlation of her experience in the program.

“Before taking the rocket program classes in high school, I had no idea I was interested in engineering, I learned about the many different engineering paths. and I fell in love with problem solving. I am now working toward my degree in Mechanical Engineering thanks to SystemsGo.”

Anissa joined the STEM program out of curiosity her freshman year, because of all she had heard about it from friends and family. She quickly realized that this class would shape her future.

“After completing the first class freshman year, I was considering majoring in engineering in college. Sophomore year pushed me even more in that direction, and after junior year there was no doubt what so ever this was my future career path. Senior year was the icing on the cake!”

As she studied in the program, her reasons changed from curiosity to excitement and the class became a priority for her.

“By junior year I was so eager to go to class every day. I knew I would learn something new or something really eventful and exciting would happen. Like running a successful student designed test that caused a nearby resident to call the fire department!” Engine and fuel burn tests can be loud and though most folks have become accustomed to these tests, this one was particularly loud, and caused a stir, something she recalls with guarded humor.

Anissa participated on two teams. The first was the Mechanical team for static hybrid propulsion testing, and then the injector team for the Redbird #15 Rocket, as long as helping with electronics, payload and engine installation. Her specific jobs on these projects included, “For propulsion and testing I prepped fuel grains by ensuring their size was exact, installing them in the test cell, and preparing the test cell by sealing the cell to prevent oxidizer leakage. After each test I would clean the test cell and prep the next fuel grain. I also set up oxidizer tanks and plumbing from the tanks to the test cell. During tests, I would make sure all solid and liquid weights were recorded to be used in calculations in the days to follow.”

The Redbird #15 is the rocket that her group designed to launch at White Sands Missile Range. This is where she really had to put her education to work and it presented her with her hardest problem to solve.

“The toughest problem I came across was “trouble shooting” an injector design that had mysteriously failed in a Redbird rocket from the year before. My teammates and I designed several tests to attempt to understand the previous failure, and this proved to be quite difficult. After a redesign with new materials, the injector worked flawlessly in our Redbird rocket.”

Even with this struggle accomplished with perfect results, she considers another success the greatest her and her team accomplished during their time in the program.

“I would consider my (and my team’s) best success being the first high school team to complete a full round of three 40 second hybrid test burns. This had been attempted by several classes before us (and even ourselves the year before), so coming back the next year and being successful was a great feeling.”

The SystemsGo program teaches individual accountability as well as team coherence. Anissa found this to be one of the most important things she learned in the program.

“This program taught me countless lessons and technical approaches to problems, but the most important thing I learned was the importance of communication. It is impossible to accomplish any great task without full communication and understanding from every team member involved.”

Many of the students who have participated in this program, not only go on to higher education and careers in STEM fields, they enjoy giving back to the program where ever possible. Anissa is no exception to this, she returns each year to help as launch pad lead at the Willow City launches. If possible she plans to continue helping and being involved with the program however possible.

“I would enjoy mentoring and helping students in the future with the design process or understanding the set up and procedures of building the static propulsion testing. I would also enjoy having a job with SystemsGo in the future. I think having experience in industry would be valuable to gain first, but I would enjoy coming back and teaching at some point.

Her current advice for students considering or currently in the program is, “work as hard as you can every day. Don’t be afraid to get sweaty and leave class with your hands dirty. It doesn’t matter how smart you are, you will learn so much if you are eager to get involved!”

Along with the fantastic education the SystemsGo STEM program provides in the Science, Technology, Engineering, and Mathematics fields, it also helps build confidence and character. It teaches each student to reach into themselves and take pride in what they are accomplishing and can accomplish. For many students, it is a learning boost they may never have known they needed until they discovered it in themselves during the program. Anissa sums up that experience.

“I learned that I am capable of accomplishing anything I have my heart in and I’m willing to work hard to achieve.”

I would like to thank Anissa Kneese for participating in this article series. These are written in hopes that all may understand the impact that STEM can have on your students and future employees. Having a program available at the high school level to teach, encourage and support this type of learning is instrumental to getting these students into great career futures. Encourage your students to get involved in STEM and the SystemsGo program if it is available at your child’s school. If it is not available, look into how you can bring it to your area. This program will greatly benefit your school and children.

If you know or have a student that went through the program that would like to share their story here, please contact me in the comment section on this blog or if you follow it on Facebook, Twitter, or LinkedIn contact me there, and I will send you information to participate.

http://www.systemsgo.org as always is the place for more information on this program. You may also email them at info@systemsgo.org .Take the time to get your school involved, the future of your students will be greatly benefited.

What’s All This About Rockets: Success Stories–Robert Deaver

In 1996 in the small town of Fredericksburg, Texas a high school Aerospace program was begun and built literally from the classroom skyward as then, teacher, Brett Williams, developed a plan to build and launch rockets in a classroom setting in order to teach and implement a STEM curriculum. This class originally known as Principles of Technology (the POT Class, as it was fondly referred too), later became the SystemsGo program of Education In Motion, teaching students all over the state and now New Mexico too how to use the principles of STEM to build a career.

In this series of Interview style articles, we will meet individuals that studied under this program and have gone on to build their futures on the skills it teaches. The first gentleman we will meet, is Robert Deaver.

When speaking with indiviuals that have been through this STEM program, especially in the beginning, one thing stands out. Most of them started out in the program because the course name/description sounded interesting, and it provided a science credit. As years went by and the program became known for building and launching rockets, that in itself became a big draw for the program, although most participants still did not expect it to have the impact on their career choices that it did.

Robert, when asked why he got involved in the STEM program, was no different. “The class name sounded interesting and it counted as a science credit.”

That simple approach drew in the first classes that set forth to build a rocket, launching the much more valuable vehicle of their futures as time and learning evolved.

Robert was in the class during its ground breaking days, working on the construction and flight of the Red Bird #1, #2 and #3 rockets. These were the very formative first two years of the program as students and teacher learned together exactly what it took to create these projects. At first this was just a really fun and new concept of hands on learning and teaching that the students enjoyed.

The original class was only a one year class, but students really took to it and then this “science credit” soon became a class that students took because they wanted to experience it again.

“The course was so much fun I asked if i could take it again and was allowed. I initially took the course because it sounded interesting. I took it a second time because it was fun and challenging,” Robert stated when asked what his reasons were for taking the course.

Robert credits the program with setting him on his career path. He earned a BS in Electrical Engineering a the University of Texas at San Antonio and a MS in Computer Engineering at the University of Tennessee. Robert worked for IBM, Dell, and after graduation, Real Time Systems, where he spent the last four years designing embedded systems that are used world-wide. After his recent marriage he moved to Boerne, where he started a new career as a hardware engineer at Futurex in Bulverde.

“I did not go directly from high school into an engineering program in college, but being exposed to the ideas and concepts of engineering in the Principles of Technology (precursor to the StystemsGo program) led me there eventually. I learned about Real Time Systems through volunteering with SystemsGo and after I graduated applied for a job with RTS and was hired.” Robert stated.

In his time in the program he worked on 3 of the Red Bird Rocket projects, #1, #2, and #3. On all three, Avionics and Electronics were his main team focus therefore he was instrumental in Altimeter configuration on all three. On RB#1 he also worked on the Audio/Video Recording and Transmission, and the Fill and Fire system design and construction. On RB#2 he took on the Recovery System design, and on RB#3 the Airframe and Fin design.

Live video transmission from rocket to ground is what he remembers as the worst problem that he tried to solve while working on the RB#1 rocket.

“The electronics were ‘fiddly’ and although it worked well on the ground, we were not able to get it functional during launch.”

In spite of this, RB#1 is still what he remembers as his best success from the program.

“I watched as a rocket that my team and I researched, designed, and built from scratch soared off the launch pad. That feeling of accomplishment is truly indescribable!”

During these years he learned that he really liked working with electronics. He also learned how to work on large projects as a team.

“The Red Bird 1, Redbird 2, and Red Bird 3 were by far the largest projects I had participated in at that time. Each project required interaction with others on my team and with other teams to complete.”

Even with all he learned he still did not realize the impact this program would make on his career choices until he was in college.

“During engineering school, I realized how much more prepared I was due to the project and team interaction skills I learned in what later became the SystemsGo Program.”

When I asked Robert what advice he would give to current and future students in the program, here is what he had to say, “If you even think you are interested in engineering take these classes and pay attention. The problem solving and team work skills you learn in the SystemsGo program will be invaluable once you get to college.”

Another success of this program is that students from past years come back year after year to volunteer with the program. Many take time out of school and careers to do this. Robert is no exception. He volunteers annually for the Central Texas, South Texas, and Goddard launches. He has also been named a board member, where he is happy to be able to, “help shape the program.”

I would like to thank Robert Deaver for participating in this article series. He is only the first in what I hope to bring to you as an ongoing series of success stories. These are written in hopes that all may understand the impact that STEM can have on your students and future employees. Having a program available at the high school level to teach, encourage and support this type of learning is instrumental to getting these students into great career futures. Encourage your students to get involved in STEM and the SystemsGo program if it is available at your child’s school. If it is not available, look into how you can bring it to your area. This program will greatly benefit your school and children.

www.systemsgo.org as always is the place for more information on this program. You may also email them at info@systemsgo.org .Take the time to get your school involved, the future of your students will be greatly benefited.

Share this:

Share this:

Share this:

Share this:

Share this:

Share this:

Share this:

Share this:

Share this:

Share this: