Rockets 2018-Friday Day 2 Report and Saturday Schedule

Friday had a slow start for rockets. A combination of the lack of rocket readiness and a cloudy sky delayed our start until about 11:30 when the first vehicle lifted off. SystemsGo was able to load 24 out of 25 rockets listed on the schedule onto the rails and launched all 24. The 25th was an abort by one of the schools.

The schedule boasted an array of interesting vehicle designs and colors. All 24 left the rail, some with picture perfect flights and a few with rather short flights landing quickly again in the field around the launch pad. These at least were easy for Recovery to locate and bring in for the students.

A Gifted and Talented class from Fredericksburg Junior High came out to get a tour and view the launches for a while this morning.

Embry Riddle University had a representative there with a booth of information, hoping to encourage students to pursue engineering education through them.

There was one particular rocket with a very different fin configuration today. Unfortunately I cannot remember the rocket’s actual name, but we all nicknamed it the Windmill. It was designed by Marble Falls High school and sported two sets of fins the larger of which gave it the appearance of a windmill fan. We were all quite interested in the launch of this vehicle since we hadn’t seen fins like this before, and were curious as to how they would perform. Below is the vehicle in stage 3.

The next sequence is from their launch. Shortly after lift off the large fins sheared off, raining down around the Pad, but the smaller fins carried the vehicle to a significant height before it nosed over and headed back down. Chute did deploy but the body separated from the chute and landed just inside the fence of the launch field, and the nose cone and chute landed on the ground across the fence about 50 yards. It really wasn’t a bad launch for the unusual rocket.

Unfortunately I don’t seem to have gotten a picture of the body tube after recovery. It was a fascinating launch, that we were all waiting to see, so I thought I would share it here as well.

That concludes the fun for Friday. Join us at the launch site again tomorrow for more action. Saturday will be our last day this year. There are no Sunday launches.

Below is the launch schedule for tomorrow, Saturday. There are 7 schools launching a total of 22 rockets tomorrow.

School Name / Teacher	1/1	Trans
Akins HS John Sayce	3	4
Alamo Heights HS Colin Lang		4
Birdville CTAL Conner Gorman	3
London HS Toni Castle	1
Manor HS Will Davis	1	1
Northwest HS Elizabeth Mitias	2	1
RL Turner HS Brian Morrill	2

Schools Launching 7
Totals	12	10
Total Rockets	22

The following is a link to the album of pictures from today’s launch. Have a look you and your school rocket just might be in there.

https://www.facebook.com/ginger.burow

Good luck to all the schools launching on Saturday. I will update the blog after we complete our day again tomorrow. Here is the link to the live stream again.

http://livestream.com/systemsgo

Please remember that although there is no charge for the event, and these launches are open to public viewing, parking and seating is limited due to safety requirements. For this reason, SystemsGo has a provided a link for you to pre-order tickets for those in your party. This also provides SystemsGo with a way to monitor the number of people in attendance each year. This is in no way meant to discourage your attendance, but is instead to help them provide a great experience for students and spectators, while doing all possible to monitor safety issues and attendance numbers at any one time during the launches.

http://www.systemsgo.org/events/

Event details will be available here each day of the event. Daily reports featuring schedules, school names, results, pictures and some editorial content will also be posted.

www.systemsgo.org as always is the place for more information on this program. You may also email them at info@systemsgo.org .Take the time to get your school involved, the future of your students will be greatly benefited.

#SystemsGo #Rockets2017 #FredericksburgSTEMAcademy #Launcher01 #SystemsGoNewMexico

Fredericksburg Rockets 2018-Thursday Day 1 Report – Friday Schedule

Thursday went well, and Rockets 2018 in Willow City is off and going. We had nice weather, warm but still with a cool breeze all day. It was bright and sunny with very little cloud cover so launches went off without any weather delays despite rain on Wednesday evening which helped to settle the dust on the range.

The team put up 19 rockets for the day and recovered all but maybe 2 which were long transonic flights at the end of the day. No worries though, there are still two more days in which to locate them.

Dave Willden from SystemsGo New Mexico is on board helping with the Pad. Phil even commandeered him for an interview during an early morning slow spot.

All in all it was a great and mostly uneventful day with a lot of really nice flights.

Come out and see us tomorrow as the action resumes again around 8:30 a.m.

Please remember that since there is public access to this event, there are registration tickets for order and those may be found on the SystemsGo website as well at this link: https://www.greateventseats.com/events.php They are FREE, but REQUIRED. There is a waiver for admission you will sign along with your admittance ticket. You can get them at the gate but it is strongly advised to do this online ahead of time so that you do not slow yourself or anyone else down getting onto the range. This could cause you and others to miss your intended launches.

Here is the link to the live stream again. https://livestream.com/systemsgo

A map to the site is on the SystemsGo website at the following link:

http://www.systemsgo.org/events/

But just in case here is a picture of the same map:

Pictures will be available here in this blog and in Facebook albums for you to view at the end of each days launches, as well as during the day from Phil and SystemsGo on Facebook as well. Links to both our Facebook pages are below.

https://www.facebook.com/ginger.burow

https://www.facebook.com/SystemsGoEducation/

Here is the schedule of schools launching Friday. Currently 7 schools and 25 rockets:

School Name / Teacher	1/1	Trans
Buinger CTE Academy Michael Skrzynski	1	2
Fabens HS Manny Moreno	2	1
Kingwood HS Louis Mascolo	3	2
Marble Falls HS Leslie Alexander	1	1
Tom Moore (Ingram) HS David Bunch	2	2
University HS Dennis Oubre	3	3
Victoria East HS Adam Wertman	2

Schools Launching 7
Totals	14	11
Total Rockets	25

I will post each days schedules in this blog. They can also be found in original format on the SystemsGo website Events page.

More event details will be available here after the completion of Saturday’s event.

If you follow this program and like to view the launches, Rockets 2018 will continue with one more launch series at this level in May. This launch will be held in Smith Point just south of Anahuac, Texas for schools in the Houston area, on the weekend of May 11-13, 2018. They currently have 56 vehicles scheduled for test by 15 schools at this site. If you have been to the Houston area launches in the past you may want to check out the SystemsGo website for information because this location is only in its second year for that area. Information and a map link are available.

The senior/graduate groups are tentatively scheduled to launch their Goddard level rockets at White Sands Missile Range (WSMR) in New Mexico in late June. These are not available for public viewing or Livestream due to being tested on a military facility, but blog and SystemsGo updates will be posted online as available during that week.

More event details will be available here in upcoming days as events get closer. Daily reports featuring schedules, school names, results, pictures and some editorial content will be posted during the events.

www.systemsgo.org as always is the place for more information on this program. You may also email them at info@systemsgo.org . Take the time to get your school involved, the future of your students will be greatly benefited.

Hope to see you at the races, nope, but I will race you for a rocket! #RideTheSky! #Launcher01 #ItISrocketScience #Rockets2018

Your local Recovery Team rocket Junkie wishes all the schools and students a picture perfect flight and recovery.

Rockets 2018- Fredericksburg Launches Start in Willow City, Thursday

The SystemsGo team has returned from the Jal Launches of Rockets 2018, and immediately transitioned to Willow City on Monday as launches begin there Thursday for Fredericksburg Rockets 2018. Launches at the Stewart’s Hillview Ranch in Willow City will only be 3 days this year, Thursday, April 26 through Saturday, April 28. Teams are already well into all the preparation to make this another fantastic event.

This testing site covers the Fredericksburg and Hill Country area schools and all Texas schools not participating in the Houston launches. Currently there are 66 rockets scheduled for launch by 24 schools at that location.

Launches will begin Thursday through Saturday at approximately 8:30 a.m. and will last at least through 5:30 p.m. each day, wind weather and rocket readiness provided.

Phil Houseal will be providing Livestream from the site again this year so friends and family can watch the action online if they cannot attend the event. Joyce BK Abbey the voice of rockets will be keeping us informed and up to date throughout each day, as well as providing Rocket Trivia, and her special brand of on site entertainment. Be sure to also watch for interviews with the rocket teams.

Texas Concessions will be providing food, snacks, and refreshments at the launch site once again this year. Restrooms will be available on site as well.

There is an 80% chance of rain Wednesday evening, so be prepared for damp conditions on the range on Thursday if that actually materializes. Of course they still have a 10% chance in for Thursday too, but then all that may change again, because as we all know Texas weather doesn’t live by the weather man’s predictions. Therefore, it is always best to be prepared for all conditions as it may be cold in the morning, hot in the afternoon, windy, rainy, or sunny. Sunscreen, rain gear and a chair are recommended. Also be advised that weather will play a factor in launch time availability and may cause delays. Please be patient.

Please remember that since there is public access to this event, there are registration tickets for order and those may be found on the SystemsGo website as well at this link: https://www.greateventseats.com/SystemsGo . They are FREE, but REQUIRED. There is a waiver for admission you will sign along with your admittance ticket. You can get them at the gate but it is strongly advised to do this online ahead of time so that you do not slow yourself or anyone else down getting onto the range. This could cause you and others to miss your intended launches.

Here is the link to the live stream again. https://livestream.com/systemsgo

Map links to the site in both PDF and Google graphics are on the SystemsGo website at the following link:

http://www.systemsgo.org/events/

But just in case here is a picture of the PDF style map:

And here is the PDF map link and Google graphic map link to the site as well.

Pictures will be available here in this blog and in Facebook albums for you to view at the end of each days launches. Phil and SystemsGo will be posting throughout the event on Facebook as well. Links to both our Facebook pages are below.

https://www.facebook.com/ginger.burow

https://www.facebook.com/SystemsGoEducation/

Here is the schedule of schools launching Thursday. It boasts 10 schools and 19 rockets:

Thursday, April 26, 2018
School Name / Teacher	1/1	Trans
Fredericksburg HS Andrew Matthes		2
Granger HS Chaston Kubacak	1
Hamilton HS Tom Parrish	1
Harleton HS Hayland Hardy	1	1
Henrietta HS Sarah Dickey	1	1
Hollenstein CTC Rick Griffith		3
Maypearl HS Allex Wilson	1
New Diana HS Shawn Warden		1
Roosevelt HS Jared Warsing	2	1
Union Grove HS Greg Park	2	1
10
Schools Launching
Totals	9	10
Total Rockets	19

I will post each days schedules in this blog. They can also be found in original format on the SystemsGo website Events page.

More event details will be available here after the completion of Saturday’s event.

www.systemsgo.org as always is the place for more information on this program. You may also email them at info@systemsgo.org . Take the time to get your school involved, the future of your students will be greatly benefited.

Hope to see you at the races, nope, but I will race you for a rocket! #RideTheSky! #Launcher01 #ItISrocketScience #Rockets2018

Your local Recovery Team rocket Junkie wishes all the schools and students a picture perfect flight and recovery.

SystemsGo New Mexico Blasts Off Its 2nd Year of Rocket Launches Tomorrow

Hello Rocket Fans, are you ready to #RideTheSky, cheering on your innovative, creative, intelligent students?! Well, tomorrow is the day! Rockets will be headed into the heavens in Jal, New Mexico. This is the second year for the SystemsGo New Mexico group and they are ready and up to the challenge, as they add Transonic vehicles to their launches for the first time at this venue. Last year they only attempted 1 pound/1 mile rockets so it will be another new learning curve for the students and volunteers at the site. No worries though, they have been training for this and the group has it all in hand.

Stage 1 and Stage 2 rocket check ins start at 1:00 today and run through 5:00 p.m. at Jal Elementary School. If your school’s rocket clears stage 2 today, Friday, it must remain at the elementary school overnight. Pick up time starts at 7:00 a.m. for these rockets.

Check out the new welcome sign at the site. That is pretty amazing!

The launch site at Phillips Hill Road will open for Stage 3 for rockets cleared on Friday evening only, at 7:30 a.m. All others report to the elementary school for Stage 1 and 2 checks and clearing. Do not bring your rocket to the launch site unless it has been cleared at Stage 2.

Please note, schools that were here last year, both the Stage 1 & 2 facility and the launch site are in different places from last year. Be sure you have correct directions and the new map link: http://www.bringonthescience.com

Recovery teams you will have a briefing at the launch site at 7:30 a.m.

General admission to the launch site begins at 8:00 a.m. Rockets are scheduled to begin launching at 8:30 but no sooner. Of course, as I mentioned yesterday, they are subject to wind, weather and workmanship all of which can delay a launch. Better put in the immortal words of Mr. Brett Williams, “A hundred things have to go right for a successful launch, but it only takes one thing going wrong to prevent it.” With that being said, take a seat, have patience, and just have fun. Be sure to bring some sideline entertainment. Books, cards, dominoes, and games are always good, or you can join in Rocket Trivia with Joyce Bk Abbey,the voice of rockets, who will be there to MC the event.

An important reminder to the day’s events is that you DO need admittance tickets. You can pre-register for these at the following link: https://www.greateventseats.com/SystemsGo . When you register for these, you are also signing a waiver for entrance to the launch site. These are required to get in. You can obtain them at the gate, but it is discouraged as it slows down entrance for you and anyone behind you to the site and may result in you and anyone behind you missing your intended launch. Pre-registration is preferred.

Concessions will be available for purchase at the launch site. Portable bathrooms will also be set up. As spectators though, remember your chairs, card tables, umbrellas, sun screen, jackets, blankets, and entertainment for down time between launches.

The current schedule of launches is shown below and is available here: http://www.systemsgo.org/events/ .


Saturday, April 21, 2018
School Name / Teacher	1/1	Transonic
Hagerman HS Andrew Rodriguez	1
Hobbs HS Shawna Carter	5
Jal HS Nathan Richard	1	1
Lake Arthur HS Steve Goluska	1	1
Loving HS David Janzen	2	1
Lovington HS Michael Dodson	2	1
New Tech Odessa HS Richard Lindner	2

7 Schools Launching
Totals	14	4
Total Rockets	18

Don’t forget, all volunteers, teachers, teams and admins are invited to Jal Country Club for a hamburger and hot dog cook out from 5:00 p.m. to 7:00 p.m. Dave Willden is your gracious host for this event.

Current weather conditions for Saturday show a bit of a warm up. 40 is the predicted low and 71 is the high. That is not too bad for the desert in April. Dress is layers, you may need a light jacket in the morning.

Good luck to the seven schools participating in this year’s New Mexico event. No matter the outcome of your launch, you have successfully designed, built and delivered a rocket to the pad for testing. In doing just that, you have learned more and will take with you more than some achieve in a life time.

Parents and spectators be sure you are ready with the cameras to catch the expressions on your students’ faces for two different events. The first is when their vehicle leaves the pad headed into the sky, and the second is when Recovery hands it back to them after launch and recovery. These are the faces of joy, excitement, and fulfillment you want to see as much as you do that rocket soaring into the blue.

SystemsGo New Mexico has a Facebook page: https://www.facebook.com/SystemsGoNM/ , and also a twitter feed: https://twitter.com/SystemsGoNM . These are a good source of information. Joyce Bk Abbey will be manning both and posting pictures and updates throughout the day in leu of Livestream which will not be available at this particular launch this year.

SystemsGo New Mexico is headed up by David Willden.

Please watch the SystemsGo website, SystemsGo Facebook page, SystemsGo Twitter feed: https://twitter.com/SystemsGoNews and this blog for upcoming information on these events.

After completion another report will be posted here, featuring results, pictures and some editorial content cataloging the success of the event.

http://www.systemsgo.org as always is the place for more information on this program. You may also email them at info@systemsgo.org. Take the time to get your school involved, the future of your students will be greatly benefited.

Hope to see you at the launches! #ItISRocketScience #RideTheSky #Launcher01

Fredericksburg’s Engineering Rocket Program-Second Term Update #2 (February 16-April 13)

It is April and we have some catching up to do on the FHS Engineering program. It has been two months since our last update and quite a bit has been happening on all levels. Along with class work, launches start this month in Jal, New Mexico on April 21 and Fredericksburg (Willow City) April 26-28 so time is becoming a factor for the Junior and senior groups. Each group is working hard to meet their timelines. Rockets 2018 is the pinnacle event for the upper level groups, as their rocket projects are basically the final grade for the year.

The seniors have approximately 73 days until Redbird 19 is TENTATIVELY scheduled for testing at White Sands Missile Range, which is usually in the last week of June. This date is still not a permanent date until the Army finalizes, closer to that time. Mr. Matthes will announce that date when it becomes readily available. Their completion date for preliminary systems tests is usually two weeks before school ends. This would be May 18 which cuts them down to 59 days.

More on these groups and their current status reports will be later in the article.

Freshman participated in a field trip on March 1st, in which they visited Southwest Research Institute(SwRI), the Center for the Intrepid, and the UTSA VIZlab. At the Center for the Intrepid, the students were able to see biomedical equipment at work helping wounded Veterans in their recovery. Along with the engineering aspect of this, Mr. Matthes hoped that they took away a new respect for our military servicemen and women and the full extent of the sacrifices they make each day for our country’s safety.

Former FHS Engineering Alumni, Drake Horstman, was the students’ guide when they visited the UTSA VIZlab, toured the campus, engineering lab and community areas. During the visit, Drake, provided entertainment and wisdom coupled with numerous stories about his experiences in the FHS Engineering Program. Inside the lab, the students were able to see several visual interaction devices.

At Southwest Research Institute, students learned technical information about engines, modifications and fuel efficiency. The content here was a little over their knowledge base, and may have overwhelmed the students a little, according to Mr. Matthes. In spite of that, it was still a good visit for the students, and the coordinator at SwRI commented about their behavior stating, “they are better than a lot of the college students who come through.”

These visits are designed to expose the students to different aspects in the engineering fields. The impressions they take from here will help them make decisions down the road on whether engineering is for them, and if so, help them determine a particular area of interest.

The Freshmen also participated in their first Critical Design Review (CDR). They were tasked with presenting solutions to fix the damaged launch tower for the Red Bird rockets. This gives them practice on presentation skills and feedback on designs for their project.

Mr. Matthes stated that, “the students may have felt “roasted” with constructive criticism and feedback. But, that they should know, that it is part of improvement and growth of design and not personal.” He mentioned that this was also discussed briefly at the end of the trip to SwRI, by the hosting engineer.

The sophomores have advanced well in the curriculum and are presently several weeks ahead of their current deadlines. Their current focus is on dimensioning objects, denoting measurements and creating fabrication notes. Due to this, their proficiency has advanced well.

Mr. Matthes is quite impressed with the Juniors selection of a class name. Here is how he describes it,”The juniors named their class “Conatus” which translates from Latin, to impulse and means striving. From a historical philosophy origin it relates to the nature of something to continue its existence.”

The pressure is on with an April 19th rocket completion date looming ever closer. The rocket must be completed one week prior to their April 26^th launch, because after it is completed they must also complete a Flight Readiness Review which often uncovers errors and problems that must be resolved. This week provides adequate time for those things to happen.

According to Mr. Matthes neither team has anything that quite resembles a rocket as of yet, but each is working through a pile of parts that arrived. Most were not ordered until the end of March which was quite late, but each group began working with tangible parts the end of last week.

Team #2 decided to make use of Monday’s teacher in-service day, by putting in about four hours of work. Shown below from team #2 are clockwise starting from the bottom, Cooper McDonald, Gloria Burns, Ethan Scott, and Dawson Harkins as they take measurements off the back-end of the rocket and motor system.

Both teams do have a work in progress at this point. According to Mr. Matthes, “Pressure makes diamonds and rockets.”

Incidentally, another incentive for each comes from SystemsGo. A flawless flight and perfect recovery may afford that team the chance to re-fly their vehicle with a different fuel grain in order to collect data for SystemsGo.

The miniature Teststand is an ongoing project for the juniors as well. They are using LabVIEW programming as a means to start ignition and measure thrust, as well as using 3D modeling in order to develop a unique physical Teststand model. The class is split into working groups of 3. According to Mr. Matthes, “They are on track to have this done by the end of school and I am excited to see what they come up with.”

Seniors are progressing well with Redbird 19, wind tunnel and the large Teststand development.

Construction is beginning on Redbird 19 now that parts are returning from Heartland Enterprises. According to Mr. Matthes the parts, “look beautiful, and most parts are in.” Now that parts are available there is a bullet list of accomplishments to be achieved including, overlaying the nose cone in fiberglass, creating a mold and then pouring the fuel grain, making a custom hose for the injection valve, testing recovery chute deployment, integrating avionics into the vehicle, and Mr. Jenkins is in the process of manufacturing the payload.

Here Harrison Spisak, Bryce Erwin, and Sergio Walle are checking the fit of the injector, nozzle and retaining ring in their fuel grain liner.

Currently wind tunnel is well underway, as students are receiving and ordering parts. The program is nearing completion and the electronics used for the drag testing measurement has arrived. Hunter Smith, a SpaceX programmer at the McGregor facility has been assisting Rebecca Sechrist through a Skype session. He has been providing analysis and comprehension in areas he has already assisted, as well as a starting point from which to move ahead. According to Mr. Matthes, “The students are making headway but must begin to make a push in order to finish this outstanding design by summer.”

Deadlines are quickly evolving for Teststand, as the group’s progress here is steady but slow. They have installed a flow meter to directly measure Nitrous oxide. Load cells which measure thrust have been changed out and fuel grains have also been readied for testing.

The stand itself is nearing a test ready state. New to this year’s stand are changes in the injection system. The new system will allow more controls of the flow. A parent plate has been designed by students and fabricated by another local machine shop, Kager Industries, which will hold a smaller injection disc allowing students the ability to change out the disc which controls the rate of flow. The plate can be installed as soon as the 0.05″ holes have been drilled through. Next, the LabVIEW program will be fully tested on the stand. Afterwards, a cold flow test will be conducted in order to measure the oxidizer flow rate and determine if the size and pattern of holes in the new disc are correct. If the cold flow tests are successful, then hot fire tests can begin.

The Baby Bird Teststand is still on hold until further notice.

SystemsGo hosted a BBQ dinner event for the neighbors in Willow City. Seniors, Bryce Erwin and Sergio Walle, pictured below, spoke at the event. Their purpose was to educate attendees about the educational process of the program and how it relates to the upcoming launches, as well as to share their own experiences in the program.

Additionally, Harrison Spisak and Corbin Smajstrala spoke to the Morning Rotary last month on similar subjects.

Mr. Matthes would personally like to thank all four of these young men for committing to these events and participating in them. In both cases, participants and SystmesGo staff commended them on their exceptional performances.

This article is the fourth for the 2017/2018 school year in a series of periodic updates that will follow the Fredericksburg Engineering/Rocket program. This school is a participant of the SystemsGo STEM program. This series of articles is intended to support and encourage students in the program as they share their working status and accomplishments throughout the year in the program. These publications will be available for tags and re-posting.

www.systemsgo.org as always is the place for more information on this program. You may also email them at info@systemsgo.org . Take the time to get your school involved, the future of your students will be greatly benefited.

2017/2018 Fall Session Hi Lights Wrap Up for Fredericksburg’s Engineering/Rocket Program-(Nov. 10-Dec. 22)

Next Friday, December 22, the Fredericksburg High School Engineering/Rocket Program will dismiss for Christmas break. When they do, five weeks will have passed since the last update on their program. This is a busy group, and there is plenty to report on their learning and progress as we wrap up the fall semester.

The Freshman have been learning about production/manufacturing engineering and have recently completed their project which was an orange juice manufacturing factory design. The class split into working groups of four because of the complexity of the problem. Their product goal for the plant was to take raw material and produce packaged juice in palletized product bundles ready for sale. According to Mr. Matthes, “It was a successful endeavor with lots of different results when it came to the challenging research it required.”

On Friday, December 15, they presented their latest project over engineering fluidity. Each student was expected to work independently to create new launch lugs for the senior level rocket. Their new lug designs need to be more aerodynamic than the current lugs. Each student was able to show what they were capable of on their own, instead of having the co-dependency of fellow students. This solo venture challenged them to create a multiview drawing of their own new design, as well as featuring their understanding of units of measurement and how they all work together, something that will be of great significance for their final project in the future, which is to research the math and then design a hybrid rocket motor. A highly significant amount of math and even more units will require their careful attention in that upcoming project . What they are learning as they work through this propulsion/aerospace problem will become relevant to them again when they begin their junior studies in 19 months. Therefore it is an important study in which to end the course.

Just to remind everyone, the Sophomore students are still working in a self paced manner in this year’s class. Therefore a good growth mark for them in their class progress is 3D printing, which they have recently begun. They have also shown marked achievement in their Autocad, Dimensioning and Isometric drawing skills. In part this is due to their receptiveness to all the constructive feedback.

Luke Duderstadt working on Autocad.

“They have advanced tremendously in their attention to detail, ability to see things with greater special awareness, and pride in workmanship. The transformation has been fun to witness,” states Mr. Matthes.

LabVIEW programming is an important focus for the juniors. At this point, Mr. Matthes says it is too early to tell their final success in this area, but so far, they are progressing well.

Fluids and aerodynamic drag have been the focus of their studies related to rockets these past five weeks. After learning these new skills, they were able to test them on the design and development of their Generation 3 rockets. In order to do this, they had to create a rocket that was stable with exactly a ‘margin’ of 1 while reaching 1800 feet in RockSim simulation and design software. Students were able to launch their actual Gen 3 rockets on Friday, Dec. 15 after they had in class rocket presentations and evaluations that morning. Additionally they were further challenged with a short deadline in which to create these rockets. They met this head on and were ready for presentations.

“It was collectively the best group of Gen 3 flights I have seen in years,” reports Mr. Matthes.

Bradley Plaza and Carl Wilger prepare to launch their Generation 3 rocket.

Jabin Gipson and Rudy Avila model their Generation 3 rocket on launch day.

They will detail the many lessons they learned, including results from mistakes in design, construction, evaluation process, and the significance of attention to detail in their post mission analysis (PMA). As they begin their second semester project, all these lessons will be critical learning tools in the success of this larger rocket.

Mr. Matthes reported, ” I was thoroughly impressed with all of them. It was the kind of work ethic that will make their senior year a success if they can manage to keep up the motivation and focus.”

Critical design reviews (CDR) are the main focus for seniors on all four of their projects, which include the Red Bird #19 Rocket, a wind tunnel, the NASA large motor test stand, and the Small HyperTek interface test stand, known as Baby Bird. Currently the group is running short on time their schedules and task lists are not reflecting all that they should. There is a possibility that they are either not aware of all that they have missed, or they are really close to being ready. Mr. Matthes is unsure at this point which one it is.

Pictured here is the seniors’ flow straightener prototype for their wind tunnel. It was 3D printed on a Makerbot.

They are scheduled to hold a preliminary design review with alumni at 10:00 on Wednesday, January 10^th, here in the classroom. A full CDR will be due at the end of January.

“One potential reality is that if it becomes evident there is not enough time for everything, some project(s) may require postponing. We are hoping for the best,” states Mr. Matthes.

On Friday, December 22, 2017 at 10:30 in Mr. Matthes’ classroom, last year’s alumni will be presented with their banner for flying the Red Bird #18 at White Sands Missile Range. Seniors will have a question and answer session with alumni to share experiences and receive advice.

At 7:00 p.m. also on Friday the 22nd, all alumni of the Fredericksburg Aeroscience/Engineering program are invited to come to Hondo’s and join Mr. Williams and Mr. Matthes for visiting over dinner and drinks. It will be casual, come and go as you like bringing significant others and friends as desired.

Mr. Matthes reminds all program students, “In January, the spring program begins and deadlines and target dates for their projects become highly important in order to meet projected launch dates.”

NEW YOU (National Engineers Week Youth Outreach United) continues its progress in planning the 4^th-8^th grade engineering outreach event to be held on February 17^th. Look for more in the newspaper and students of those grades bring home flyers in January.

This article is the Third for the 2017/2018 school year in a series of monthly updates that will follow the Fredericksburg Engineering/Rocket program. This school is a participant of the SystemsGo STEM program. This series of articles is intended to support and encourage students in the program as they share their working status and accomplishments throughout the year in the program. These publications will be available for tags and re-posting.

www.systemsgo.org as always is the place for more information on this program. You may also email them at info@systemsgo.org . Take the time to get your school involved, the future of your students will be greatly benefited.

2017/2018 Fredericksburg’s Engineering/Rocket Program-September Hi Lights

The new school year is three weeks into session and with it, the Fredericksburg High School Engineering Program has begun working toward new goals.

This year (Fall semester) there are actually classes representing each grade level. This is different from last year in that there were two classes of Freshman in the fall and two classes of Sophomores in the spring. There will be a class of 12 Freshman in the fall and another class of 12 in the spring, and a class of 16 Sophomores in the fall and another class of 12 in the spring.

The Freshman classes began by learning about the design and development loop. This is important because it gives them an understanding on how industry approaches problems in order to develop new innovation. Leadership and teamwork have been a strong topic of class discussion as well as exercises to put these traits into practice. This week in class they are testing cardboard structures they have built as part of the structural project part of their class.

Pictured: Kyle Kuhlman, Andrew Kendrick, and Gavin West.

Pictured: Luke Tucker, Benji Robles, and Kolby Fryburger.

Pictured: Paige Guzy, Emily Ma, Evertt Borton.

Pictured: Nehemiah Cabral, Sadie Eidson, and Eli Rode.

Here the whole class shows off their cardboard structures for testing.

Sadie Eidson with an unofficial test of her structure post ‘real’ testing while Gavin West looks on awaiting collapse without satisfaction.

Pictured here is this semester’s Freshman class: Back Row: Kolby Fryburger, Luke Tucker, Everett Borton, Gavin West, Nehemiah Cabral, Benji Robles. Front Row: Eli Rode, Andrew Kendrick, Kyle Kuhlman, Sadie Eidson, Paige Guzy, Emily Ma.

Mr. Matthes reports, “They are doing very well.”

Sophomores are practicing drawing multi-views by hand. Students are able to work at their own pace this year, as long as they meet scheduled deadlines on assignments. This allows for those that learn at a faster pace to advance in the curriculum a little sooner. It should also allow them to have more time to become proficient on 3D modeling which will be a skill they will need as they move up in future classes. Soon they will begin the basics of drawing on AutoCAD. Due to the individual pacing, one student was able to begin AutoCAD yesterday.

Pictured here is this semester’s Sophomore class: Back Row: Noah Downey; Tommy Johnson, Gavin Eckert, Lane Wallendorf, Ryan Scroggie, Landon West, Clay Crouse. Front Row: Dalton Waters, Blake Boubel, Ryan Davis, Luke Duderstadt, Ryan Majors, Chad Braden, Gerry Balderas. Not Pictured here are Josephine Shaw and Alek Vasquez.

Junior and Senior classes will encompass both semesters as one class group each. There are 22 Juniors in the program and 10 Seniors.

Due to the accelerated class schedule implemented at FHS last year, most one year courses are now accomplished in one semester. Because of this, the Junior year course study is actually two classes in one spread out over both semesters. Class time is currently split between two courses of study. In the first half of class they are beginning the basics of hybrid rocket propulsion and the book learning of the math to model it. In the second half of the class, they have researched advanced technology and dimensional analysis.

According to Mr. Matthes, “Many of them reflected afterward that they have a better understanding of math, how to work with units, what the units mean, and how the math has meaning and can be worked like a puzzle. They are very excited and extremely sharp. They work effectively as a group and seem to have great chemistry together.”

Pictured here is this year’s Junior class: Back Row: Jabin Gipson, Cooper McDonald, Ander Castaneda, Gabe Voorhees, Jose Escalante, Clay Ellebracht, Dawson Harkins. Middle Row: Jana Brockmann, Robert Sanchez, Esten Cooke, Gloria Burns, Carl Wilger, Nicholas Rodriguez, Lucio Castro, Cody Blohm. Front Row: Eduardo Memije, Robert Zowie, Brad Plaza, Ethan Scott, Deja Turkett, Rudy Avila, Josh Handley.

The Seniors are a busy and ambitious group this year. They have taken on four large endeavors including: The Red Bird #19 Rocket, a wind tunnel, the NASA large motor test stand, and the Small HyperTek interface test stand, known as Baby Bird.

The Red Bird #19 will actually be a modified version of the Red Bird #17 from two years ago which did not leave the rail due to the injection failing. They will be rebuilding the propulsion and injection systems in order to correct the past problems with the rocket that kept it from launching in 2016. –Small editorial comment here: As we have seen with other schools in past years at WSMR, this does not mean an easy fix. Quite often trying to correctly discern and correct another team’s issues on an unsuccessful vehicle can be harder than starting from scratch. It will be interesting to follow them and see what they find and how these new modifications affect this year’s flight test at WSMR. FHS Engineering Project Leadership for Red Bird #19 is Chief Engineer, Harrison Spisak, and Project Manager, Bryce Erwin.

The Wind Tunnel is new for this year. This device is for testing drag on an object. To do this, the system uses a fan to create artificial wind which is forced over the object to create a drag. FHS Engineering Project Leadership for the wind tunnel is Chief Engineer, Pierce Vasquez, and Project Manager,Rebecca Sechrist.

Testing on Baby Bird, the Hypertek test stand continues this year. The purpose of this test stand, as highlighted in the last year’s updates, is to test a fuel grain system designed and developed by the students to interface with the hypertek injector and tank. Original plans were that three successful tests on this test stand would result in the opportunity for the seniors in the Fredericksburg Engineering Program to fly a new Hybrid student developed rocket at Willow City. This year’s team is continuing testing and development for this goal. FHS Engineering Project Leadership for this test stand is Chief Engineer, Evan Knapp, and Project Manager, Sergio Walle.

Testing also continues on the NASA Test stand for large motors. Even though there is no new grant from NASA this year, there are plenty of materials acquired from last year’s grant to continue testing. FHS Engineering Project Leadership for this test stand is Chief Engineer, Joey Leal, and Project Manager, Corbin Smajstrla.

Mr. Matthes commented about this year’s seniors, “The group, already has plans set to come in this weekend to begin their endeavors. They seem both excited about the projects and motivated to accomplish them.”

Last school year the program implemented a Senior out of class work schedule. Students signed a contract requiring them to commit to a set amount of overtime/after class work time in order to meet all deadlines and complete their rocket/projects for the year. The group is currently establishing a working schedule in order to implement these hours.

Pictured here is this year’s Senior class: Back Row: Harrison Spisak, Jacob Wienecke, Evan Knapp, Bryce Erwin, Sergio Walle. Front Row: Corbin Smajstrla, Rebecca Sechrist, Pierce Vasquez, Joey Leal. Not pictured in the seniors picture was Chris Calzada.

You may have seen the following information on a flyer your Engineering student brought home inviting you to the FHS open house that was held on Monday, September 11. If you no longer have it or were not able to attend, Mr. Matthes has asked that you take note of the following date and time for:

FHS Engineering Night

SAVE THE DATE:

When: Monday, SEPTEMBER 25^TH, 6:00PM

Why: Learn about the nationally recognized FHS Engineering/Rocket Program

Who: Anyone – tell other parents and your friends, even if they aren’t in the program until next semester or aren’t a part of it yet. It is available to interested and current students as well as parents and interested community members.

Where: Auditorium, plan on sitting up front for an “A”. Address is 1107 S. Highway 16

What: Information/Order forms on Polos, t-shirts, decals and lanyards.

Including: Program objectives, overview of classes, media, and special guest alumni via Skype.

Follow Us, the FHS Engineering Program

You and your student are also invited to use the forms of media communication listed below to receive information and updates on all things Engineering.

The first is REMIND, (a text format) where you will find event notifications, updates, organizational coordination, and brief positive news provided on the program.

Text to 81010 the message @fhseng2021 for freshman Principles of Applied Engineering class

Text to 81010 the message @fhseng2020 for sophomores Engineering Design and Presentation 1

Text to 81010 the message @fhseng2019 junior Engineering Design and Presentation 2

Text to 81010 the message @fhseng2018 seniors Engineering Design & Problem Solving, Scientific Research and Design

Mr. Matthes sincerely hopes that students and parents will more actively follow and invest in the Engineering Program here at FHS. One method to help with this is providing updates related to engineering and our Engineering Program through social media. These will contain postings related to student activities as well as industry activity. Familiarity with current events and current research in industry is a major source of inspiration and exposure to potential future endeavors.

fhseng

https://www.instagram.com/fhseng/?hl=en

FHS S.T.E.M. Academy

@engineeringfhs

https://www.facebook.com/engineeringfhs/

The entire Engineering Program was invited to a movie night at the engineering classroom, Wednesday evening, September 13 at 7:00 p.m. They viewed the movie the Matrix. Mr. Matthes believed that a correlation between the students and the movie characters could be drawn and that could be beneficial to them. “It is my hope they recognize the metaphor for their own lives and begin to believe in themselves as I believe them, as Morpheus believes in Neo.” About 20 were able to attend.

This article is the first for the 2017/2018 school year in a series of monthly updates that will follow the Fredericksburg Engineering/Rocket program. This school is a participant of the SystemsGo STEM program. This series of articles is intended to support and encourage students in the program as they share their working status and accomplishments throughout the year in the program. These publications will be available for tags and re-posting.

www.systemsgo.org as always is the place for more information on this program. You may also email them at info@systemsgo.org . Take the time to get your school involved, the future of your students will be greatly benefited.

Share this:

Share this:

Share this:

Share this:

Share this:

Share this:

fhseng

Share this: